***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Published by Cement Concrete & Aggregates Australia, this publication provides information on cost-effective techniques for the design and construction of concrete industrial and commercial pavements to achieve the required performance. For the purpose of this Guide, both internal floors and external pavements are referred to as pavements.
Principles and details provided are applicable to pavements found in a wide range of commercial and industrial buildings, including warehouses and stores, manufacturing plants, engineering workshops and garages, and offices and shopping complexes.
This third edition takes into account changes relevant since the second edition was published in 1999. In addition:
Relevant charts have been extended to cover 5- and 8-tonne axle loads.
Combined wheel and post loads have been included.
Concrete strengths up to 100MPa are covered.
Information on joints has been extended to cover armouring of joints and shear transfer at joints.
An appendix on the design of dowels has been added
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Posted by: RyanRS - 08-09-2015, 12:25 AM - Forum: Steel
- No Replies
Behaviour and Design of Steel Structures to AS4100
Author(s)/Editor(s): Nick Trahair, Mark A Bradford | Size: 16 MB | Format:PDF | Quality:Original preprint | Publisher: CRC Press | Year: June 18, 1998 | pages: 488 | ISBN: 9780419229209
Summary
The behaviour of steel structures and the criteria used in their design are set out in detail in this book. The book bridges the gap between the methods of analysis and the sizing of structural components. The basis of the limit state design criteria of the latest Australian code for structural steel are explained, and the reader is pointed to the relevant provisions of the code.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Finite Element and Boundary Methods in Structural Acoustics and Vibration provides a unique and in-depth presentation of the finite element method (FEM) and the boundary element method (BEM) in structural acoustics and vibrations. It illustrates the principles using a logical and progressive methodology which leads to a thorough understanding of their physical and mathematical principles and their implementation to solve a wide range of problems in structural acoustics and vibration.
It is written for final-year undergraduate and graduate students, and also for engineers and scientists in research and practice who want to understand the principles and use of the FEM and the BEM in structural acoustics and vibrations. It is also useful for researchers and software engineers developing FEM/BEM tools in structural acoustics and vibration.
This text:
Reviews current computational methods in acoustics and vibrations with an emphasis on their frequency domains of applications, limitations, and advantages Presents the basic equations governing linear acoustics, vibrations, and poroelasticity Introduces the fundamental concepts of the FEM and the BEM in acoustics Covers direct, indirect, and variational formulations in depth and their implementation and use are illustrated using various acoustic radiation and scattering problems Addresses the exterior coupled structural–acoustics problem and presents several practical examples to demonstrate the use of coupled FEM/BEM tools, and more .
Finite Element and Boundary Methods in Structural Acoustics and Vibration utilizes authors with extensive experience in developing FEM- and BEM-based formulations and codes and can assist you in effectively solving structural acoustics and vibration problems. The content and methodology have been thoroughly class tested with graduate students at University of Sherbrooke for over ten years.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Mechanical Systems: A Unified Approach to Vibrations and Controls
Author: Roger F. Gans | Size: 10 MB | Format:PDF | Quality:Original preprint | Publisher: Springer International Publishing | Year: 2015 | pages: 437 | ISBN: 9783319083704
This essential textbook concerns analysis and control of engineering mechanisms, which includes almost any apparatus with moving parts used in daily life, from musical instruments to robots. A particular characteristic of this book is that it presents with considerable breadth and rigor both vibrations and controls. Many contemporary texts combine both of these topics in a single, one term course. This text supports the more favorable circumstance where the material is covered in a one year sequence contains enough material for a two semester sequence, but it can also be used in a single semester course combining two topics. “Mechanical Systems: A Unified Approach to Vibrations and Controls” presents a common notation and approach to these closely related areas. Examples from the both vibrations and controls components are integrated throughout this text.
Table of contents :
Front Matter....Pages i-xvi
Overview with Some Definitions and Mathematics....Pages 1-20
One Degree of Freedom Systems....Pages 21-78
More Than One Degree of Freedom Systems and the Euler-Lagrange Process....Pages 79-128
Modal Analysis....Pages 129-171
Vibration Measurement....Pages 173-199
State Space, Equilibrium, Linearization, and Stability....Pages 201-256
Classical Control....Pages 257-288
The Basics of State Space Control....Pages 289-331
Observers....Pages 333-359
Tracking Control....Pages 361-393
Introduction to Nonlinear Control....Pages 395-431
Back Matter....Pages 433-437
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Structural Vibration: A Uniform Accurate Solution for Laminated Beams, Plates and Shells with General Boundary Conditions
Author(s): Guoyong Jin, Tiangui Ye, Zhu Su | Size: 10 MB | Format:PDF | Quality:Original preprint | Publisher: Springer-Verlag Berlin Heidelberg | Year: 2015 | pages: 312 | ISBN: 9783662463635
This book develops a uniform accurate method which is capable of dealing with vibrations of laminated beams, plates and shells with arbitrary boundary conditions including classical boundaries, elastic supports and their combinations. It also provides numerous solutions for various configurations including various boundary conditions, laminated schemes, geometry and material parameters, which fill certain gaps in this area of reach and may serve as benchmark solutions for the readers.
For each case, corresponding fundamental equations in the framework of classical and shear deformation theory are developed. Following the fundamental equations, numerous free vibration results are presented for various configurations including different boundary conditions, laminated sequences and geometry and material properties. The proposed method and corresponding formulations can be readily extended to static analysis.
Table of contents :
Front Matter....Pages i-xii
Fundamental Equations of Laminated Beams, Plates and Shells....Pages 1-35
Modified Fourier Series and Rayleigh - Ritz Method....Pages 37-62
Straight and Curved Beams....Pages 63-98
Plates....Pages 99-151
Cylindrical Shells....Pages 153-197
Conical Shells....Pages 199-233
Spherical Shells....Pages 235-269
Shallow Shells....Pages 271-303
Back Matter....Pages 305-312
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Author(s)/Editor(s): Singiresu S. Rao | Format:PDF | Quality:Unspecified | Publisher: John Wiley & Sons | Year: 2007 | pages: 720 | ISBN: 978-0471771715
Successful vibration analysis of continuous structural elements and systems requires a knowledge of material mechanics, structural mechanics, ordinary and partial differential equations, matrix methods, variational calculus, and integral equations. Fortunately, leading author Singiresu Rao has created Vibration of Continuous Systems, a new book that provides engineers, researchers, and students with everything they need to know about analytical methods of vibration analysis of continuous structural systems.
Featuring coverage of strings, bars, shafts, beams, circular rings and curved beams, membranes, plates, and shells-as well as an introduction to the propagation of elastic waves in structures and solid bodies-Vibration of Continuous Systems presents:
* Methodical and comprehensive coverage of the vibration of different types of structural elements
* The exact analytical and approximate analytical methods of analysis
* Fundamental concepts in a straightforward manner, complete with illustrative examples
With chapters that are independent and self-contained, Vibration of Continuous Systems is the perfect book that works as a one-semester course, self-study tool, and convenient reference.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
The Wiley Dictionary of Civil Engineering and Construction: English-Spanish/Spanish-English
Author(s): Felicitas Kennedy
Published By:Jonh Wiley &Sons, Inc.
Published Year:1996
Size: 10.9 MB
Quality:Unspecified
Abstract: The Wiley Dictionary of Civil Engineering and Construction: English-Spanish/Spanish-English
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Hey All,
I am looking for the following book. Any assistance would be greatly appreciated.
Title: Tables for the hydraulic design of pipes, sewers and channels 8 Edt. Vol 1 & 2
ISBN: 0 7277 3355 9
Published by Thomas Telford Publishing