ISO 22157-1:2004 Bamboo — Determination of physical and mechanical properties — Part 1: Requirements
Author: ISO/TC 165 | Size: 0.44 MB | Format: PDF | Quality: Unspecified | Publisher: ISO | Year: 2004 | pages: 26
This part of ISO 22157 specifies test methods for evaluating the following characteristic physical and strength properties for bamboo: moisture content, mass per volume, shrinkage, compression, bending, shear and tension.
This part of ISO 22157 covers tests on specimens of bamboo that are conducted to obtain data, which can be used to establish characteristic strength functions and to arrive at the allowable stresses. The data can also be used to establish the relationship between mechanical properties and factors, such as moisture content, mass per volume, growth site, position along the culm, presence of node and internode, etc., for qualitycontrol functions.
This part of ISO 22157 covers tests on specimens of bamboo that are conducted to obtain data, which can be used to establish characteristic strength functions and to arrive at the allowable stresses. The data can also be used to establish the relationship between mechanical properties and factors, such as moisture content, mass per volume, growth site, position along the culm, presence of node and internode, etc., for qualitycontrol functions.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
TR ISO 22157-2:2004 Bamboo — Determination of physical and mechanical properties — Part 2: Laboratory manual
Author: ISO/TC 165 | Size: 1.28 MB | Format: PDF | Quality: Unspecified | Publisher: ISO | Year: 2004 | pages: 28
This Technical Report provides informative guidelines for staff in laboratories on how to perform tests according to ISO 22157-1.
NOTE From here on, this Technical Report will only give information on subclauses of ISO 22157-1 if needed; consequently the numbering is not successive.
NOTE From here on, this Technical Report will only give information on subclauses of ISO 22157-1 if needed; consequently the numbering is not successive.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************