Perfect didactical structure, inclusion of the latest research results for contemporary teaching Covering materials science from undergraduate till graduate student level Unique approach and mixture of topics for introductory and also graduate courses in materials science In-depth treatment of the constitution and properties of materials Crystallography, lattice defects, microstructural analysis and to phase equilibria included
This book offers a strong introduction to fundamental concepts on the basis of materials science. It conveys the central issue of materials science, distinguishing it from merely solid state physics and solid state chemistry, namely to develop models that provide the relation between the microstructure and the properties.
The book is meant to be used in the beginning of a materials science and engineering study as well as throughout an entire undergraduate and even graduate study as a solid background against which specialized texts can be studied. Topics dealt with are "crystallography", "lattice defects", "microstructural analysis", "phase equilibria and transformations" and "mechanical strength". After the basic chapters the coverage of topics occurs to an extent surpassing what can be offered in a freshman's course.
About the author
Prof. Mittemeijer is one of the top scientists in materials science, whose perceptiveness and insight have led to important achievements. This book witnesses of his knowledge and panoramic overview and profound understanding of the field. He is a director of the Max Planck Institute for Metals Research in Stuttgart.
Content Level » Graduate
Keywords » Analysis of the microstructure of materials - Course on mechanical properties of materials - Materials engineering textbook - Materials science textbook - Mechanical strength - Microstructure of materials course
Related subjects » Characterization & Evaluation of Materials - Materials - Mechanics - Physical Chemistry - Special types of Materials - Structural Materials
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Posted by: budis - 12-18-2010, 05:52 AM - Forum: Archive
- No Replies
Title : "Development & use of Capacity Spectrum"
Author : Sigmund A. Freeman
Conference : Proceeding of 6th U.S. National Conference on Earthquake Engineering
Location : Seattle
Year : 1998
Language : English
Title : "Capacity Spectrum Method Based On Inelastic Spectra"
Author : Peter Fajfar
Journal : Earthquake Engineering & Structural Dynamics, Vol 28, page 979-993
Year : 1999
Language : English
Engineering Economic Analysis
Author(s): Donald G. Newnan, Ted G. Eschenbach, Jerome P. Lavelle
Publisher: Oxford University Press
Date: 2004 Format: PDF Language: English ISBN10: 0195168070
Pages: 624 Size: 34.80 MB
Now in a ninth edition, Engineering Economic Analysis offers comprehensive coverage of financial and economic decision-making for engineering projects, with an emphasis on problem solving, life cycle costs, and the time value of money. The spreadsheet material from the previous edition has been expanded, allowing students to create and analyze more realistic cash-flow models. The authors' concise, accessible writing style and practical emphasis make this text ideal for undergraduate engineering economy courses.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according to this European Standard are used for the treatment of raw domestic wastewater.
It covers plants with tanks made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP) and Glass Reinforced Polyester (GRP-UP).
The test methods specified in this European Standard establish the performance of the plant, needed to verify its suitability for the end use (see 3.1).
This European Standard applies for small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product.
This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole.
NOTE In some countries, domestic wastewater treatment plants are followed by other systems to conform to national regulations.
P.S.
In 2009 the standard was amended. The last version is EN 12566-3:2005+A1:2009.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
This standard provides rules for the determination of design values for thermal conductivity and thermal resistance of both masonry and masonry products.
It also describes how the basic values for the calculation of design thermal values are determined and also the calculation methods to derive design values from basic values. It covers solid masonry units (clauses 4 and 5) and masonry units with formed voids and composite masonry units (clause 6).
Three procedures for the determination of thermal resistance and/or thermal conductivity are described. These procedures are:
- To use tabulated lambda - and/or R-values.
- To measure the lambda - and/or R-value.
- To calculate the equivalent lambda - and/or R-value.
It takes into account the major different types of masonry products:
- Solid masonry units.
- Masonry units with formed voids.
- Composite masonry units.
The design value of a product characteristic is the value determined for specific application and for use in calculations.
Design thermal values are determined, according to the procedure given in this standard by the user/designer and building authority according to the intended application, environmental and climatic conditions, bearing in mind the purpose of this determination, such as:
- energy consumption;
- design of heating and cooling equipment;
- surface temperature determination;
- compliance with national building codes;
- consideration of non steady state thermal conditions in buildings.
A specific building product can have different design thermal values according to the intended application. Normally the producers/distributors will supply design values for their products.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
This Technical Specification specifies a method for determining the freeze/thaw resistance of clay masonry units that are declared by the manufacturer as meeting the requirements for HD units and as suitable to be subjected to severe (F2) exposure.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references the latest edition of the referenced document (including any amendments) applies.
EN 771-1 Specification for Masonry Units — Clay Masonry Units
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Egyptian Code of Practice for Steel Construction and Bridges
ASD 2008 11.10.2008 (Allawble Stress Design)
SECOND EDITION 2008
MINISTERIAL DECREE NO 279 -2001
Total no of pages :279
The code covers the following topics:
ch1:Materials
ch2:Allawble Stresses
ch3:Fatigue
ch4:Stability and Slenderness Ratois
ch5:Structural Welding
ch6:bolted connections
ch7:Plate Girders
ch8:Truss Bridges
ch9:complementary Requirements for Design and Construction
ch10:Composite steel-concrete construction
ch 11:Cold - formed sections
ch12:Dimensional tolerances
ch13:Fabrication ,erection and finishing works
ch14: Inspection and maintenance of steel Bridges
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
This European Standard applies to waste water drainage systems which operate under gravity. It is applicable for drainage systems inside dwellings, commercial, institutional and industrial buildings.
Differences in plumbing within Europe have led to a variety of systems being developed. Some of the major systems in use are described but this standard has not attempted to detail the intricacies of each system. Detailed information additional to that contained in this standard may be obtained by referring to the technical documents listed in annex A.
This first part of the standard establishes the general and performance requirements for waste water gravity drainage systems. It makes limited provision for pipework conveying trade effluent and for fluids removed by pumps.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Powerful yet simple techniques to solve project management's toughest problems. This book teaches companies to drastically cut project development times resulting in early completion within budget and without compromising quality or specifications.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
"Anyone who doesn't snap up a copy is missing a wonderful opportunity for professional and personal development." -- Assembly
"Critical Chain will revolutionize project management." -- World Aero-Engine Review
"Critical Chain's powerful yet simple techniques...solve project management's toughest problems." -- James R. Holt, Professor of Engineering Management, Washington State University
"Eli Goldratt's first novel, The Goal, shook up the factory floor...Goldratt essentially adds a discipline for understanding what drives project performance and therefore what the focus of a project manager's attention should be." -- Harvard Business Review
"This book (Critical Chain) is valuable to two main audiences: project managers and senior managers... useful for dealing with one of the most difficult and pressing management challenges: developing highly innovative new products." -- Harvard Business Review
![[Image: 32515637283188657579.jpeg]](https://pic.civilea.com/images/32515637283188657579.jpeg)
![[Image: info.png]](https://forum.civilea.com/postgen/icon/info.png){kind=icon}
![[Image: Download.png]](https://forum.civilea.com/postgen/icon/Download.png){kind=icon}
![[Image: password.png]](https://forum.civilea.com/postgen/icon/password.png){kind=icon}
![[Image: 13641578921311206582.jpg]](https://pic.civilea.com/images/13641578921311206582.jpg)
![[Image: info.png]](https://forum.civilea.com/postgen/info.png)
![[Image: Download.png]](https://forum.civilea.com/postgen/Download.png)
![[Image: password.png]](https://forum.civilea.com/postgen/password.png)
![[Image: 45805240021410799947.png]](https://pic.civilea.com/images/45805240021410799947.png)
![[Image: 76631392910718200962.png]](https://pic.civilea.com/images/76631392910718200962.png)
![[Image: 72303709038682897367.png]](https://pic.civilea.com/images/72303709038682897367.png)
![[Image: 05891497231518906742.jpg]](https://pic.civilea.com/images/05891497231518906742.jpg)
![[Image: 88099568445757977343.png]](https://pic.civilea.com/images/88099568445757977343.png)
![[Image: 90169767881860859378.jpg]](https://pic.civilea.com/images/90169767881860859378.jpg)
![[Image: comments.png]](https://forum.civilea.com/postgen/icon/comments.png){kind=icon}