Could anyone please share all the following standards.
EN 14227. Hydraulically bound mixtures – Specifications
Part 1: Cement bound granular mixtures (CBGM).
Part 2: Slag bound mixtures (SBM).
Part 3: Fly ash bound mixtures (FABM).
Part 4: Fly ash for hydraulically bound mixtures.
Part 5: Hydraulic road binder bound mixtures (HRBBM).
Part 10: Soil treated by cement (SC).
Part 11: Soil treated by lime (SL).
Part 12: Soil treated by slag (SS).
Part 13: Soil treated by hydraulic road binder (SHRB).
Part 14: Soil treated by fly ash (SFA).
SEISMIC PERFORMANCE ASSESSMENT OF REINFORCED CONCRETE BUILDINGS WITH PRECAST CONCRETE FLOOR SYSTEMS
Author: Brian Hsuan-Hsien PENG | Size: 9.8 MB | Format:PDF | Quality:Unspecified | Publisher: UNIVERSITY OF CANTREBURY | Year: 2009 | pages: 495
In the seismic design of reinforced concrete frames, plastic hinges are allocated to beams such that a ductile beam-sway mechanism will form in preference to other less
ductile mechanisms in the event of a major earthquake. This is achieved by ensuring that the flexural strength of columns is greater than that corresponding to the maximum likely flexural strength of beam plastic hinges. Recent experimental studies in New Zealand have shown that elongation of ductile beam plastic hinges, and its interaction with nearby floor slab containing precast- prestressed floor units, increases the strength of beams much more than that specified in New Zealand and American Concrete standards. This level of strength enhancement has raised concern on the adequacy of the current design provisions. To further investigate this problem, a research project was initiated to examine the
strength of beam plastic hinges in reinforced concrete frames containing precast- prestressed floor units. In this research, the strength of beam plastic hinges was assessed through
experimental and analytical studies. A three-dimensional, one-storey, two-bay reinforced concrete moment resisting frame with prestressed floor units and cast-in- situ concrete topping was tested under quasi-static displacement-controlled cyclic loading. The experimental results provided insight into the mechanics associated with frame-floor interaction. Subsequently, improved design specifications were proposed based on the observed behaviour. To analytically predict the beam-floor interaction, a ductile reinforced concrete plastic hinge multi-spring element was developed and validated with experimental results from cantilever beam and frame sub-assembly tests reported in the literature. The comparisons have demonstrated the ability of the proposed plastic hinge element to predict the flexural, shear, axial, and most importantly, elongation response of ductile plastic hinges.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
This book, framed in the processes of engineering analysis and design, presents concepts in mechanics of materials for students in two-year or four-year programs in engineering technology, architecture, and building construction, as well as for students in vocational schools and technical institutes. Using the principles and laws of mechanics, physics, and the fundamentals of engineering, Mechanics of Materials: An Introduction for Engineering Technology will help aspiring and practicing engineers and engineering technicians from across disciplines—mechanical, civil, chemical, and electrical—apply concepts of engineering mechanics for analysis and design of materials, structures, and machine components. The book is ideal for those seeking a rigorous, algebra/trigonometry-based text on the mechanics of materials.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Proceedings of the Tenth East Asia Pacific Conference On Structures Engineering and Construction (EASEC-10)
Author: Worsak Kanok-Nukulchai & other | Size: 21.8 MB | Format:PDF | Quality:Unspecified | Publisher: Asian Institute of Technology, Thailand | Year: 2006 | pages: 524
Proceedings of the Tenth East Asia Pacific Conference
On Structures Engineering and Construction (EASEC-10)
Volume 1 Emerging Trends: Keynote Lectures and Symposia
Volume 2 Analytical and Computational Methods
Volume 3 Wind and Earthquake Engineering
Volume 4 Real Structures: Bridges and Tall Buildings
Volume 5 Construction and Professional Practices
Volume 6 Materials, Experimentations, Maintenance and Rehabilitation
Volume 7 Recent Advances in Structural Engineering, Mechanics and Materials:
The Pisidhi Karasudhi Symposium Volume
This is Volume 3
Wind and Earthquake Engineering
Earthquake Engineering
Structural Dynamics
Wind Engineering
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
AutoCAD® Map 3D software provides access to GIS and mapping data to support planning, design, and data management. Intelligent models and CAD tools help you to apply regional and discipline-specific standards.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
ConPrimer-2
Finite Element
Concepts-Modeling and Application
Technical Seminar
The Objective
• To understand the fundamentals of the
Finite Element Method and the Finite Element Analysis
• To apply the Finite Element Analysis Tools for Modeling and Analysis of Structures
• Use SAP2000 as Tool for Finite Element Modeling and Analysis of Structures
The Program
• What is FEM and Why it is needed
• Fundamental concepts in FEM and FEA
• Concept of Stiffness
• Finite Elements and their Usage
• Constructing Finite Element Models
• Applying Loads to FE Models
• Interpreting FE Results
• Modeling Different Types of Structures
• Intro to Non-linear and Dynamic Analysis
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Autodesk Entertainment Creation Suite Ultimate 2016 (x64)
Size: 5.51 GB
Entertain with a powerful 3D animation pipeline
Produce higher-quality entertainment content with 3D animation software in the Entertainment Creation Suites. With specialized creative toolsets integrated to form a modern, flexible pipeline, the suites help you tackle current projects and prepare for new opportunities.
Included software Ultimate and Standard editions Ultimate: Get the freedom to use the 3D tool of your choice, with 3ds Max, Maya, all included.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Autodesk 3ds Max Entertainment Creation Suite Standard 2016 (x64)
Size: 4.7 GB
The 3ds Max Entertainment Creation Suite provides an affordable end-to-end creation solution, packed with tools used by leading artists working in visual effects, 3D game development, and other 3D animation production.
The 3ds Max Suite edition offers Autodesk 3ds Max modeling and 3D animation software, together with Autodesk Mudbox digital sculpting and painting software, and Autodesk MotionBuilder real-time character animation software. Integrated through single-step interoperability workflows and common look and feel elements, the Max Standard Suite helps increase productivity and provide enhanced creative opportunities.
Includes:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Dear all,
The following ISO standard is needed
Thank you.
ISO 14046:2014
Environmental management -- Water footprint -- Principles, requirements and guidelines
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation: