Install Windows XP on A Machine Already Running Windows Vista OR Windows 7
Install Windows XP on A Machine Already Running Windows Vista OR Windows 7 (I installed on windows vista but believed that it will work same way for Windows 7. So wherever that you see windows vista, you could replace it with Windows 7 if that is your operating system)
I found it difficult to install Orion on my computer running on window vista operating system. Based on my experience with the Xp os which did not give me any problem as to install the software, I opted to install the window Xp os. But before that, I first tried the virtual Pc e.t.c but ended up with a system that was not able to operate the simple basic functions such as the movement of the pointer. Once I switched over to the virtual Pc, my computer became so doll (despite the fact that it is a 3GB RAM, 300GB hardisk machine) that I did not even try to go ahead and install the software since I intuitioned that it will not be possible to run the programmers in the virtual pc since it was so difficult to even manipulate the pointer. So I stopped forthwith. From searches and suggestions, I came up with the idea to have a dual operating system on same computer. Then I decided to install the Xp os on the same computer that I bought with the vista os already installed. This is how I did it-courtesy John Barnett (computer journalist);-
Dual booting any Windows operating system has always had to follow a set plan; and that plan, simply put, was the oldest operating system must be installed first, followed by the newest operating system.
This has been the time honored tradition until the release of Windows Vista. Because Windows Vista has a totally different boot loader to previous versions of Windows, it is now possible, with a little help from a third party shareware application called VistaBootPro (alternatively you could use the freeware application called EasyBCD) to actually install Windows XP on a machine that already has Windows Vista installed. For this article we will be using VistaBootPro.
The instructions below show you how to create a dual boot system between Windows Vista and Windows XP.
For simplicity we are going to use the scenario whereby your PC already has Windows Vista installed. If this is not the case, it is a simple matter to install Vista first onto your PC and then follow the steps outlined below.
Preliminaries
To create a dual boot system you require two separate partitions on your hard drive, or else two separate hard drives. Now as most PC manufacturers' allocate all the space on a single hard drive for the use of Windows Vista it means that before you can proceed to install Windows XP you are going to have to shrink the main partition and then create a new partition from the available free space. So to do this proceed as follows.
Partitions
1/ Boot your PC to Windows Vista.
2/ Click the Start button and then Right Click on the Computer option.
3/ From the Drop down menu that appears, select Manage followed by Disk Management.
4/ In the Disk Management window, Right Click on the Primary partition (colored blue) of the hard drive graph at the bottom of the Disk Management window and, from the drop down menu, select the Shrink Volume option.
5/ The Shrink Volume wizard will now appear.
6/ As you go through the wizard you will be asked by how much you wish to shrink the main partition. Assuming you also want to be able to install programs on the XP partition, try allocating between 10 to 15GB (or more if you have the space) for the XP partition. If you are using Vista Home Premium or above, you should also ensure that the final Vista partition is no lower than 40GB, preferably more.
7/ After you have shrunk the main primary partition by the required amount you will be left with the primary partition (containing Vista) and a section of unallocated or free space. It is in this unallocated space where you now will create a partition in which to install Windows XP.
8/To create a new partition, Right Click on the unallocated space and, from the drop down menu, select Create.
9/ Follow the Create Partition wizard through and allocate all of the unallocated space for the new partition.
10/ Once the new partition has been created, Close the Disk management window and Reboot your PC.
11/ This Reboot changes the configuration settings within Windows Vista. In order to complete the finalization of your new partition as soon as your PC has booted to the desktop reboot your PC again.
12/ As the PC reboots quickly insert the Windows XP CD into your CD-ROM.
13/ XP will now begin the installation process. Continue to install XP making certain that you install it to the New partition you created.
14/ Once XP has been installed and the PC has rebooted you will no longer have access to Windows Vista (this is because the Vista boot loader has been over written by XP's boot.ini file) Instead you will boot directly to Windows XP.
15/ At this point proceed as if you were only installing XP. Set up your Internet Connection, Firewall, Anti \virus etc and then download any available updates. Some updates you will not be able to download until XP has actually been activated but, for the present, activation of XP can wait.
VistaBootPro
16/ Once you have updated XP with the few available updates, download and install the third party shareware application called VistaBootPro. You don't have to use VistaBootPro, you can, alternatively, use the freeware application. EasyBCD.
17/ VistaBootPro requires .NET Framework 2.0 for it to run, so make certain, when prompted by VistaBootPro setup, that you install the .NET Framework 2.0 prior to installing VistaBootPro.
18/ Once VistaBootPro has been installed open VistaBootPro. You will be prompted to back up your BCDedit files, but you can ignore this.
19/ Once VistaBootPro is open, Click on the Boot loader tab and then Select the Reinstall the Vista boot loader option, and Press OK.
20/ The Vista boot loader will now be installed.
21/ After the boot loader has been installed, Click on the Diagnostics option on the main toolbar and Select the Run Diagnostic option.
22/ After the diagnostic program has run (which should take a few seconds) you will default back to the Manage OS Entries page.
23/ On this page you should see Two entries:
· Earlier Versions of Windows
· Microsoft Windows Vista OR windows 7
The Earlier versions of Windows option is where Windows XP will be. You can change the wording of this option by clicking on the Earlier Version of Windows and then putting a check mark in the rename selected operating system option. A new dialogue box will appear where you can type the new name. For simplicity it is better to rename it to Windows XP or something similar.
24/ All that is left to do now is Restart your PC.
25/ When the PC restarts you will be presented with a menu giving you the option to boot into either Windows XP (Earlier Version of Windows) or Microsoft Windows Vista.
26/ Select the operating system you want to boot to and Press Enter.
27/ Your selected operating system should now appear on your screen.
Additional Note
Windows XP does have a problem with Windows Vista's shadow copy feature. This basically means that, when you boot into XP, all system restore points and shadow copies on Windows Vista will be deleted. To remedy this situation see the following knowledge base article. Go to:-
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Transmission of prestress by bond - fib internal report
"Transmission of prestress by bond " - 37 pag.
fib Internal Report of TG9.4 to Commission 9
Prof. Dr. Ir. A.S.G. Bruggeling
Abstract:
It is shown that since the production of precast pre-tensioned concrete elements started more than 50 years ago, no one ever succeeded yet in the determination of the real transmission length nor in obtaining adequate measures to control it, due to the quality of the production. A study of existing standards confirms these arrears.
A simple method of determining the transmission length is introduced. That method is suitable for the determination of tensile stresses in tendons as well as bond stresses along the transmission zone. It is especially useful in the case of very short transmission lengths that can be found in high strength concrete and in use of tendons made of aramid or carbon fibres. In research projects, but also in quality management of the manufacturing process of precast pre-tensioned units, this method is likely to open new opportunities.
Practical problems of determining the way of transmission of the prestressing force into the surrounding concrete are seen to play a dominant role.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
I've just made an excel spreadsheet and want to share with you. You can check the ultimate moment capacity of a beam(rectangular or T, bonded prestress or non prestress or both). I,ve verified with an example of AASHTO.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Hi All,
i'min need for the "Masonry Standards Joint Committee’s (MSJC) 2008 Building Code"
I already searched the forum for it with no luck.
thanks in advance for the Cooperation’s
=========================================
More information:
TMS MSJC-2008
2008 Masonry Standard Joint Committee's (MSJC) Book -- Building Code Requirements and Specification for Masonry Structures, Containing TMS 402-08/ACI 530-08/ASCE 5-08, TMS 602-08/ACI 530.1-08/ASCE 6-08, and Companion Commentaries (Includes Errata 1)
The Masonry Society / 28-Feb-2008 / 256 pages
Advances in Performance-Based Earthquake Engineering
Michael N. Fardis - Advances in Performance-Based Earthquake Engineering
Springer | ISBN: 9048187451 | 2010-07-29 | PDF | 486 pages | 14.80 Mb
Performance-based Earthquake Engineering has emerged before the turn of the century as the most important development in the field of Earthquake Engineering during the last three decades. It has since then started penetrating codes and standards on seismic assessment and retrofitting and making headway towards seismic design standards for new structures as well. The US have been a leader in Performance-based Earthquake Engineering, but also Europe is a major contributor. Two Workshops on Performance-based Earthquake Engineering, held in Bled (Slovenia) in 1997 and 2004 are considered as milestones. The ACES Workshop in Corfu (Greece) of July 2009 builds on them, attracting as contributors world-leaders in Performance-based Earthquake Engineering from North America, Europe and the Pacific rim (Japan, New Zealand, Taiwan, China). It covers the entire scope of Performance-based Earthquake Engineering: Ground motions for performance-based earthquake engineering; Methodologies for Performance-based seismic design and retrofitting; Implementation of Performance-based seismic design and retrofitting; and Advanced seismic testing for performance-based earthquake engineering.
Audience: This volume will be of interest to scientists and advanced practitioners in structural earthquake engineering, geotechnical earthquake engineering, engineering seismology, and experimental dynamics.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Hi friends im a student of M.Tech.(str), doing project on "EFFECT OF RATE OF COOLING ON THE PROPERTIES OF FLY ASH CONCRETE AFTER SUBJECTING TO SUSTAINED ELEVATED TEMPERATURE."
Plz check if u can get me relevant papers.
Extend the power of AutoCAD® software and AutoCAD-based products with AutoCAD® Raster Design graphics software. Make the most of rasterized scanned drawings, maps, aerial photos, satellite imagery, and digital elevation models. Get more out of your raster data and enhance your designs, plans, presentations, and maps.
Use AutoCAD Raster Design graphics software with AutoCAD®, AutoCAD® Architecture, AutoCAD® Civil, AutoCAD® Civil 3D®, AutoCAD® Electrical, AutoCAD® Map 3D, AutoCAD® Mechanical, AutoCAD® MEP, AutoCAD® P&ID, and Autodesk® Topobase™ software to unlock and extend the value of existing design information.
When used with AutoCAD Map 3D-based software, AutoCAD Raster Design graphics software offers additional raster editing, visual analysis, and geospatial image processing capabilities.
Downloaded from hotfile and installed.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
IMPORTANT NOTICE: You may use this software for evaluation purposes only.
If you like it, it is strongly suggested you buy it to support the developers.
By any means you may not use this software to make money or use it for commercial purpose.
Concrete Design Handbook 2nd Edition Aug1995
Scanned PDF 63MB with Bookmarks
Also INCLUDED as Part I
- CSA Standard A23.3-94 Design of Concrete Structures (Canadian Standards Association)
- Explanatory Notes on CSA Standard A23.3-94
The Canadian Portland Cement Association web page:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
WaterGEMS is an easy-to-use hydraulic and water quality modeling solution for water distribution systems.
It features advanced interoperability, model building, optimization, and asset management tools. WaterGEMS runs on your choice of four platforms (stand alone, Microstation, AutoCAD, or ArcGIS). From fire-flow and constituent-concentration analyses, to energy-consumption and capital-cost management, WaterGEMS helps engineers and utilities analyze, design, and optimize water distribution systems. Water utilities, municipalities, and design engineering firms trust WaterGEMS as a reliable, resource-saving, decision-support tool for their water infrastructure. Criticality Analysis allows users to find the weak links in a water system and assess the adequacy of isolation valves. They depend upon its robust hydraulic analysis, practical model management, eloquent result interpretation tools, and unrivaled ease of use.
Trial
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
IMPORTANT NOTICE: You may use this software for evaluation purposes only.
If you like it, it is strongly suggested you buy it to support the developers.
By any means you may not use this software to make money or use it for commercial purpose.
Water Distribution Modeling and Management Model hydraulics, operations, fire flow, criticality, and water quality with ease using your favorite environment.
WaterCAD is an easy-to-use hydraulic and water quality modeling solution for water distribution systems. It features advanced interoperability, model building, optimization, and asset management tools. From fire-flow and constituent-concentration analyses, to energy-consumption and capital-cost management, WaterCAD helps engineers and utilities analyze, design, and optimize water distribution systems. Water utilities, municipalities and design engineering firms trust WaterCAD as a reliable, resource-saving, decision-support tool for their water infrastructure. They depend upon its robust hydraulic analysis, practical model management, eloquent result interpretation tools, and unrivaled ease of use.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
IMPORTANT NOTICE: You may use this software for evaluation purposes only.
If you like it, it is strongly suggested you buy it to support the developers.
By any means you may not use this software to make money or use it for commercial purpose. Moderator Notes:
All install problems related to this program go to thread:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
![[Image: info.png]](https://forum.civilea.com/postgen/info.png)
![[Image: 94730339956757816421.jpg]](https://pic.civilea.com/images/94730339956757816421.jpg)
![[Image: Download.png]](https://forum.civilea.com/postgen/Download.png)
![[Image: 92203148923561268345.jpeg]](https://pic.civilea.com/images/92203148923561268345.jpeg)
![[Image: screen.png]](https://forum.civilea.com/postgen/screen.png)
![[Image: 17134518572879008968.jpg]](https://pic.civilea.com/images/17134518572879008968.jpg)
![[Image: password.png]](https://forum.civilea.com/postgen/password.png)
![[Image: 35171121073787710328.jpg]](https://pic.civilea.com/images/35171121073787710328.jpg)
![[Image: 52676652862284665147.jpg]](https://pic.civilea.com/images/52676652862284665147.jpg)
![[Image: 04155496486835009224.jpg]](https://pic.civilea.com/images/04155496486835009224.jpg)
![[Image: 77307156438838343038.jpg]](https://pic.civilea.com/images/77307156438838343038.jpg)
![[Image: 12089636553144559165.gif]](https://pic.civilea.com/images/12089636553144559165.gif)
![[Image: 81685880011573816679.gif]](https://pic.civilea.com/images/81685880011573816679.gif)
![[Image: 18394237854511558883.gif]](https://pic.civilea.com/images/18394237854511558883.gif)