The National Earthquake Hazards Reduction Program (NEHRP) ecommended Seismic Provisions for New Buildings and Other Structures is a well-known technical resource document for improving national seismic design standards and model building codes. Each edition of the NEHRP rovisions has been developed based on the most recent advancements in earthquake engineering and research. The 2020 NEHRP Provisions ontinues to apply the current state-of-knowledge in earthquake engineering for mproving the seismic design of uildings and other structures. It presents a set of recommended improvements to the ASCE/SEI 7-16 Standard: inimum Design Loads and Associated Criteria for Buildings and Other tructures, and nine resource papers on new concepts, suggested future development, and technical information in support of the recommended improvements. The NEHRP Provisions is developed and evaluated through an expert-based consensus process to ensure validity and quality of the recommended new changes. It is intended primarily for use by ational standards and code organizations and earthquake engineering rofessionals.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
I have written this spreadsheet for design of elastomeric bearings of bridges based on the newest version of AASHTO. I have uploaded it to be used by all. I would appreciate your comments in case you have.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
I have written this spreadsheet for calculation of wind loads on building MWFRS, Walls C&C, and Roof C&C based on ASCE 7-16. I have uploaded it to be used by all. I would appreciate your comments in case you have.
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Dynamic CPT for test-pit field investigations: experiences with Sowers's cone Penetrometer: Robinson, L. Proceedings 24th Symposium on Engineering Geology and Soils Engineering, Coeur D'Alene, 29 Feb - 2 March 1988. P31-42. Publ Washington: Washington State University 1988
The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results.
From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier - intuitive drawing commands allow for the rapid generation of floor and elevation framing. CAD drawings can be converted directly into ETABS models or used as templates onto which ETABS objects may be overlaid. The state-of-the-art SAPFire 64-bit solver allows extremely large and complex models to be rapidly analyzed, and supports nonlinear modeling techniques such as construction sequencing and time effects (e.g., creep and shrinkage).
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Release Note:
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
ETABS now utilizes cloud licensing, allowing access to the license by multiple users and/or from multiple machines. Cloud licensing normally requires connection to the internet while using the software, either directly or through a proxy. Licenses can be checked out for a limited time period to allow use while disconnected from the internet.
More info:
Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.
🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈
Schmertmann J.H. & Crapps D. (1984). “Guidelines for using the CPT, CPTU and Marchetti DMT for Geotechnical Design”, Report No. FHWA-PA-87-024+84-24, Vol. III of IV
I dont know how many are there but I do have come across two of them in references of a research paper:-
DG-200 Structural Design for Hydraulic Structures
DG-201 Horizontal Earthquake Effects, Hydrodynamic Pressures
![[Image: 92248404633895499916.jpg]](https://pic.civilea.com/images/92248404633895499916.jpg)
![[Image: info.png]](http://postgen.civilea.com/icon/info.png){kind=icon}
![[Image: download.png]](http://postgen.civilea.com/icon/download.png){kind=icon}
![[Image: password.png]](http://postgen.civilea.com/icon/password.png){kind=icon}
![[Image: 67600673397366694193.png]](https://pic.civilea.com/images/67600673397366694193.png)
![[Image: 13869719375601096750.png]](https://pic.civilea.com/images/13869719375601096750.png)
![[Image: ETABS_web_1920X500_heroimage_final.jpg]](http://s17.picofile.com/file/8412190834/ETABS_web_1920X500_heroimage_final.jpg)
![[Image: homepage.png]](http://postgen.civilea.com/icon/homepage.png){kind=icon}
