[REQUEST] ASTM Standards - ASTM International

[whwy99]

Dear all member,

l m looking for this ASTM. Thanks

[whwy99]

Dear all member,

Looking for this ASTM. Thanks

[didie]

Dear All,

If you had the following ASTM section please share it with us.

ASTM D1195/D1195M-09 Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements.

Many thanks in advance.

Cheers,

Didie

[medo_sk]

Hi Civileans,

I need:
- LUM.D.2, In-situ stress tests on masonry based on the flat jack, 1991
- LUM.D.3, In-situ strength/elasticity tests on masonry based on the flat-jack, 1990

from RILEM book:
RILEM Recommendations for the Testing and Use of Constructions Materials, 1994.

and

- ASTM, In-situ compressive stress within solid unit masonry estimated using flat-jack measurements, ASTM Standard C 1196-91, 1991
- ASTM, In-situ measurement of masonry deformability properties using flat-jack method, ASTM Standard C 1197-91, 1991

If anyone has this, please share it.

[utan]

Please help me to find
ASTM D2573 - 08

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Thanks in advance!

[utan]

Dear All,
Please help me to find ASTM 6067-10.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Thanks in advance!

[kegumingxin]

Dear all,

Can you please upload the ASTM 7176? I need it for my work. Thank you.

[hessi]

Hi dudes
ASTMC230-90,Standard specification for flow table for use in tests of
hydraulic cement,Annual book of ASTM standards,vol.04.02.3.American
Society for Testing and Materials

I will appreciate if any body can help me by providing this code for me

[ypyenpham]

ASTM D3740 - 10 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

[rkce]

Dear Members,

ASTM F1145 - 05(2011) Standard Specification for Turnbuckles, Swaged, Welded, Forged

Abstract

This specification covers swaged welded, cast, or forged turnbuckles with and without jam nuts. A turnbuckle is an internally threaded loop or sleeve intended for assembly with a threaded stud, eye, hook, or jaw at each end, used for applying tension to rods, wire rope, and so forth. Turnbuckles shall be of the following types and grades: Type I (forged, spread, resistance welded and arc or gas welded); Type II; and Type III. Turnbuckles shall be of the following classes; Class A; Class B; Class C; Class D; Class E; Class F; Class G; and Class H. The following tests shall be performed: proof test; breaking strength test; bending test; and galvanizing test.

Please share ASTM F1145 - 05(2011)!

Anyway is there any TIS or other standard similar to ASTM F1145?

Best regards,

rkce