02-11-2017, 05:31 PM
Test Study on the New Method of Bearing Replacement of Simple Support-Continuous Girder Bridge
Does anyone here have access to the above article? If you do, please upload it here.
I don't mind paying for the article (it costs 1 euro or something), but it's imposible for me to figure out the payment system in the website above because in order to access the article one has to pay through a website which is in Chinese language.
This post has been made by CivilEA Post-Generator V2.3.1
- Author(s): GUO Yan-fen,ZHANG Yong-shui,WAN Fei,HU An-lin
- Published By: School of Civil Engineering & Architecture,Chongqing Jiaotong University
- Quality: Unspecified
- Related Link: Private Note:
- Abstract: The simple support-continuous girder bridge is widely used in the highway construction.With the increase of operation period of bridge,the issues of bearing replacement must be faced.Aiming at the case of transforming the high piers bridge with simple support to T continuous girder bridge on the Shuima Highway in the mountainous area,and the new method of bearings replacement is put forward by model test.This method is called longitudinal single-point(followed by pier),lateral synchronous jacking-up.Taking the safety of girder body in the lifting process as the goal,the limits of lifting bearings for T girder bridge of 20,30 and 40 meter span are obtained respectively.The results show that the new method "longitudinal single-point(followed by pier),lateral synchronous jacking-up" is reasonable and feasible,and the structural safety is assured.It has provided a new method and a new way for bearing replacement of similar bridges.
Does anyone here have access to the above article? If you do, please upload it here.
I don't mind paying for the article (it costs 1 euro or something), but it's imposible for me to figure out the payment system in the website above because in order to access the article one has to pay through a website which is in Chinese language.
This post has been made by CivilEA Post-Generator V2.3.1