Static Cone to Compute Static Settlement over Sand

[miquan]

Static Cone to Compute Static Settlement over Sand

Author: JH Schmertmann | Size: 2.6 MB | Format: PDF | Quality: Scanner | Publisher: ASCE | Year: 1970 | pages: 36

Static Cone to Compute Static Settlement over Sand

by John H. Schmertmann, M.ASCE, (Prof. of Civ. Engrg., Univ. of Florida, Gainesville, FL)

Journal of the Soil Mechanics and Foundations Division, Vol. 96, No. 3, May/June 1970, pp. 1011-1043

Abstract:
At least two methods for using static cone data to predict settlement exist and have received extensive use—those of Terzaghi-Peck-Meyerhof and Buisman-DeBeer. Another method is presented in this paper. All three methods are then applied to 16 test cases involving either actual foundations, or plate load tests, with measured settlements. The proposed method simplifies calculations without sacrificing conservatism, yet appears most accurate over the full scope of the available test cases. These involve foundation widths of 2 ft to 184 ft. The key feature of the new method is that a single distribution of a strain influence factor is assumed for all cases. This method eliminates the need to compute the intermediate parameter of change in vertical stress with depth below a shallow footing. Also presented is a new correlation between static cone-bearing capacity and sand compressibility. Compressibility was measured in-situ by a special screw-plate form of plate-bearing load test. New data are included for the correlation between the static cone-bearing capacity and SPT blow count values in sands.

Improved Strain Influence Factor Diagrams

Author: JH Schmertmann | Size: 2.6 MB | Format: PDF | Quality: Scanner | Publisher: ASCE | Year: 1978 | pages: 36

Improved Strain Influence Factor Diagrams

by John H. Schmertmann, F.ASCE, Phillip R. Brown, M.ASCE, and John Paul Hartman, M.ASCE

Journal of the Geotechnical Engineering Division, Vol. 104, No. 8, August 1978, pp. 1131-1135

Abstract: Studies by the writers have added further insight to the Schmertmann strain factor method for the prediction of settlement over sand. The writers now make suggestions for several modifications to the method that should usually result in improved vertical strain distribution and settlement predictions under long footings.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6