Australia Steel Institute Design Guide

leong8929 · (This post was last modified: 08-23-2012, 02:08 PM by leong8929.)

Design Guide 1: Bolting in structural steel connections

Design Guide 1 contains both design information and practical information on the types of structural bolts used in structural steel connections in Australia at the present time.

The design guide provides information on dimensions, design, specifications for bolts, certification of bolts, fabrication and erection issues related to bolts and bolting. It is aligned with AS 4100-1998 and supersedes AISC "Bolting of steel structures", 3rd ed., 1990.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

Design Guide 2: Welding in structural steel connections

Design Guide 2 contains practical information on the welding processes used to fabricate structural steel connections in Australia at the present time.

It does not however contain design information. The guide is aligned with AS 4100-1998 and AS 1554.1-2004 and is intended to be a basic primer on all aspects of welding as applied to structural steel connections.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

Design Guide 3: Web side plate connections

Design Guide 3 covers the web side plate connection, a simple connection in terms of AS 4100-1998. It references Handbook 1 for a number of design solutions used in the recommended Design Model for the web side plate connection and is aligned with AS 4100-1998.

The design guide describes the web side plate connection, provides generalised detailing for the connection, a recommended design model involving 10 separate design checks, two design examples and 6 design capacity tables derived for a selected geometry using the recommended design model. This publication supersedes two sections in AISC "Design of structural connections" by Hogan, T. J. and Thomas, I. R., 1994.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

Design Guide 4: Flexible end plate connections

Design Guide 4 covers the flexible end plate connection which is a simple connection in terms of AS 4100-1998. It references Handbook 1 for a number of design solutions used in the recommended Design Model for this connection.

Design Guide 4 describes the flexible end plate connection, provides generalised detailing for the connection, a recommended design model involving ten separate design checks, one design example and four design capacity tables derived for a selected geometry using the recommended design model.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

Design Guide 5: Angle cleat connections

Design Guide 5 covers the single and double angle cleat connection which is a simple connection in terms of AS 4100-1998. It references Handbook 1 for a number of design solutions used in the recommended Design Model for the angle cleat connection.

This design guide describes the connection, provides generalised detailing for the connection, a recommended design model for both single and double angle cleats, each involving ten separate design checks, two design examples and ten design capacity tables derived for a selected geometry using the recommended design model.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

Design Guide 6: Seated connections

Design Guide 6 covers four types of seated connections which are all simple connections in terms of AS 4100-1998. It references Handbook 1 for a number of design solutions used in the recommended Design Models for seated connections.

This design guide describes each type of seated connection, provides generalised detailing for the connection, a recommended design model for each, one design example for each connection type but no design capacity tables.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

**shadabg** · 08-24-2012, 06:59 AM

Design Guide 1:

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Design Guide 2:

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Design Guide 3:

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Design Guide 4:

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Design Guide 5:

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Design Guide 6:

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

albani · 08-24-2012, 08:15 AM

Mirror with all the 6 Design Guides:

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

enghitman · 05-04-2015, 02:45 PM

Hello,,

Can anyone upload the rest of design guides developed by ASI as it becomes 27 Design Guides till now,,i searched the forum and i did not find except these 6 design guides.

Regards

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Australia Steel Institute - Design capacity tables for structural steel	leong8929	5	3,130	12-26-2022, 10:41 AM Last Post: poolmand
	Australia Steel Ins Design example for multistorey composite steel framed building	leong8929	2	2,186	01-18-2020, 05:45 PM Last Post: monter
	AISC Design Guide 35 Steel-Framed Storm Shelters	sabooryan	0	807	09-05-2019, 06:08 PM Last Post: sabooryan
	Design guide for concrete-filled double skin steel tubular structures	carolinandra	0	719	04-16-2019, 04:02 PM Last Post: carolinandra
	SCI P130: Building Design Using Cold Formed Steel Sections: An Architect’s Guide	muqiang	2	1,765	01-11-2014, 06:25 PM Last Post: arshiakh
	Australia Steel Institute Handbook 1	leong8929	1	1,408	08-24-2012, 06:38 AM Last Post: shadabg
	Bracing Cold-Formed Steel Structures: A Design Guide (Incomplete)	Vladimir	1	1,578	04-22-2012, 03:06 PM Last Post: david-smith