ASTM Standards Collections - ASTM International

[ir_71]

Dear friend,
your standard is here, I think this is current version:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Regards
IR

[ir_71]

Dear pelelo,
the requested standards are in this archive:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Regards
IR

[ir_71]

ASTM D7263-2009 is here:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Good luck!

[ir_71]

ASTM D1140:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Regards
IR

[fordcell]

Check out the D7263 here:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[oanm2000]

Check this link:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

It´s the ASTM 5334-2010, not the 2008... I think it´s better
Regards
oanm2000

[mz55]

i shared it for u in:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[ir_71]

ASTM D5340 – 10 Standard Test Method for Airport Pavement Condition Index Surveys

Author: ASTM Committee E17 | Size: 7.3 MB | Format: PDF | Publisher: ASTM International | Year: 2010 | pages: 54

1.1 This test method covers the determination of airport pavement condition through visual surveys of asphalt-surfaced pavements, including porous friction courses, and plain or reinforced jointed portland cement concrete pavements, using the Pavement Condition Index (PCI) method of quantifying pavement condition.
1.2 The PCI for airport pavements was developed by the US Army Corps of Engineers through the funding provided by the U.S. Air Force (1, 2, 3).2 It is further verified and adopted by FAA (4), and the U.S. Naval Facilities Engineering Command (5).
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate
safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Made By CivilEA Post-Generator ver 2.0

[ir_71]

Hi, dear pelelo

You can find this standards :
1. ASTM D3740 – 10 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

2. ASTM D1586 – 08a Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

3. ASTM D4220 – 95 (Reapproved 2007) Standard Practices for Preserving and Transporting Soil Samples

4. ASTM D5079 – 08 Standard Practices for Preserving and Transporting Rock Core Samples

5. ASTM D5434 – 09 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

in one archive in:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Regards
IR

[utan]

Here you are:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************