Process Piping Design Handbook (vol 1 & 2) - by Peter Smith

junaid · (This post was last modified: 03-11-2013, 04:23 AM by usman.)

The Fundamentals of Piping Design

Book Description:

Written for the piper and engineer in the field, this volume fills a huge void in piping literature since the "Rip Weaver" books of the 90s were taken out of print. Focussing not only on Auto CAD, but also on other computer-aided design programmes as well and manual techniques not found anywhere else, the book covers the entire spectrum of needs for the piping engineer. Covering general piping systems, this basic guide for the piping engineer offers standards in practices for covered in the original "Rip Weaver" series. It is the perfect introduction to the design of piping systems, various processes and the layout of pipe work connecting the major items of equipment for the new hire, the engineering student and the veteran engineer needing a reference.

Links:

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Flexi · 04-06-2010, 05:03 PM

new links:

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

cordoba123 · (This post was last modified: 03-04-2011, 08:02 AM by Grunf.)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Process Piping Design Handbook-Advanced Piping Design Vol. 2 by Rutger Botermans and Peter Smith

Book Details
BookAdvanced Piping Design
Authors: Rutger Botermans,Peter Smith
Publisher: Gulf Publishing Company
ISBN-101933762187
ISBN-139781933762180
Edition: Hardcover 05/2008
Total Pages: 224
Language: English

Book Description
Advanced Piping Design

Advanced Piping Design is an intermediate-level handbook covering instruction and procedures of process piping systems. As a follow up with his essential work published in 2007 by GPC Books, The Fundamentals of Piping Design, Peter Smith provides an all-inclusive handbook contributing more detailed information on the critical piping components, such as pumps, compressors and heat exchangers. Connecting piping design with the essential equipment, these two volumes together are a must-have for any piping engineer.

[Image: Download.png]

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

kowheng · (This post was last modified: 11-06-2012, 02:52 PM by kowheng.)

Mirror Links: Volume 1
[Image: Download.png]

Bookmark (secured) multi-PDF(S)|RAR 12.89|12.15 MB

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

portal61 · (This post was last modified: 11-25-2011, 02:51 PM by Dell_Brett.)

Process Piping Designing Handbook - Advanced Piping Design (Volume Two)

Written for the piping engineer and designer in the field, this two part-series helps to fill a severe void in piping literature, since the "Rip Weaver" books of the '90s were taken out of print at the advent of the Computer Aid Design (CAD) era. "Advanced Piping Design" is an intermediate-level handbook covering guidelines and procedures on process plants and interconnecting piping systems. As a follow up with Smith's best-selling work published in 2007 by GPC Books, "The Fundamentals of Piping Design", this handbook contributes more customised information on the necessary process equipment required for a suitable plant layout, such as: pumps; compressors; heat exchangers; tanks; cooling towers and more!Combining essential equipment with best practices, Botermans and Smith extend the book's benefits to incorporate: Instructions for laying out the plant; Applicable international codes; Piping support and stress issues; Operation and maintenance influencing piping design; and, Safety precautions. While integrating equipment with all critical design considerations, these two volumes together are must-haves for any engineer continuing to learn about piping design and process equipment.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.1

arshiakh · 03-09-2013, 02:29 PM

Advanced Piping Design (Process Piping Design Handbook - Vol 2

Written for the piping engineer and designer in the field, this two part-series helps to fill a severe void in piping literature, since the "Rip Weaver" books of the '90s were taken out of print at the advent of the Computer Aid Design (CAD) era. "Advanced Piping Design" is an intermediate-level handbook covering guidelines and procedures on process plants and interconnecting piping systems. As a follow up with Smith's best-selling work published in 2007 by GPC Books, "The Fundamentals of Piping Design", this handbook contributes more customised information on the necessary process equipment required for a suitable plant layout, such as: pumps; compressors; heat exchangers; tanks; cooling towers and more!Combining essential equipment with best practices, Botermans and Smith extend the book's benefits to incorporate: Instructions for laying out the plant; Applicable international codes; Piping support and stress issues; Operation and maintenance influencing piping design; and, Safety precautions. While integrating equipment with all critical design considerations, these two volumes together are must-haves for any engineer continuing to learn about piping design and process equipment.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Sedimentation Process and Design of Settling Systems (Springer Transactions in Civil	TAFATNEB	1	733	03-02-2017, 10:51 AM Last Post: civilfafa
	Process Piping: The Complete Guide to Asme B31.3	timosi™	5	2,271	11-10-2014, 03:07 AM Last Post: jones
	Piping and Pipeline Engineering: Design, Construction, Maintenance, Integrity, Repair	cordoba123	3	2,029	04-15-2014, 04:14 PM Last Post: Mohammad6299
	Managing the Building Design Process - by Gavin Tunstall	struceng	4	1,609	03-02-2013, 12:47 PM Last Post: pezhmankhan
	Engineering Design Process	utan	1	1,064	12-27-2011, 12:28 PM Last Post: lisine
	Process Plant Construction: A Handbook for Quality Management	junaid	0	880	10-21-2011, 07:24 PM Last Post: junaid
	Seismic Design and Retrofit of Piping Systems	Hengki	1	1,194	03-22-2011, 09:27 PM Last Post: 3fan