AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
Author: Committee BD-042 | Size: 9.8 MB | Format: PDF | Publisher: Standards Australia | Year: 1992 | pages: 12 | ISBN: 0726272744
This Standard sets out a method for preparing and curing of concrete shrinkage specimens, and for determining the length changes of these specimens due to drying in air. It provides for testing of specimens prepared in the laboratory or in the field, in which the nominal size of aggregate in the concrete, in accordance with AS 2758.1, does not exceed 40 mm. The precision statement in Clause 9 does not apply to specimens which have had non-standard initial curing (normally field-prepared specimens). In addition this Standard requires that field-prepared specimens are marked, recorded and reported as such.
NOTES:
This test method is not always suitable for very low slump concrete (less than 20 mm), primarily due to the difficulties in obtaining adequate compaction. Provided adequate compaction is obtained, the method is applicable. The method is specifically designed for measurement of drying shrinkage of concrete, but it is capable of adaptation for measurement of length changes of specimens subjected to a variety of environmental conditions.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Amd.1 :1993 to AS 1012.13:1992 :
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************