AISC - Steel Design Guides

[Ernest0]

Structural Stainless Steel

Author: NANCY BADDOO | Size: 20.3 MB | Format: PDF | Quality: Original preprint | Publisher: American Institute of Steel Construction | Year: 2013 | pages: 150

Design Guide 27, Structural Stainless Steel, provides guidance for the design of structural stainless steel. It is written for engineers experienced in the design of carbon steel structural components but not necessarily in the design of stainless steel structures, and is aligned with the design provisions in the 2010 AISC Specification for Structural Steel Buildings. It applies to the design of structural hot-rolled or welded open sections such as I-shaped members, channels, and equal-leg angles. It also applies to rectangular and round hollow structural sections (HSS). The guidance provided is applicable to austenitic, duplex and precipitation hardening stainless steel structural sections with thickness 1/8 in. (3 mm) and greater. Major topics covered are material behavior and selection, cross-section design, member design, connections, and fabrication. Design Examples are also included.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator v2.2.0

---

Stability Design of Steel Buildings

Author: Lawrence G. Griffis, P.E, Donald W. White, Ph.D. | Size: 16 MB | Format: PDF | Quality: Original preprint | Publisher: American Institute of Steel Construction | Year: 2013 | pages: 176

With the 2005 AISC Specification for Structural Steel Buildings, the state of the art in structural steel design was advanced to include three methods for stability design, including the introduction of the powerful new approach - the direct analysis method. The primary purpose of this Design Guide is to discuss the application of each of the three methods - the direct analysis method, the effective length method, and the first-order analysis method - and to introduce the direct analysis method to practicing engineers. This Design Guide illustrates the application of the overall stability design requirements of the AISC Specification using representative examples taken from routine design office practice. Emphasis is placed on practical applications as opposed to theoretical derivations. (design guide 28)

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator v2.2.0

[pezhmankhan]

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[Diquan]

Dears,

Here are all the Design Guides from AISC in one folder.

Every time a new Design Guide comes out, I'll put it on the folder.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

The password for each one is:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Regards,


Note:
Use The Latest WinRar to open this Archive (Winrar 5)
mybest

[Ernest0]

Design Guide 29: Vertical Bracing Connections--Analysis and Design

Author: Larry S. Muir, P.E.;William A. Thornton, Ph.D., P.E. | Size: 16.8 MB | Format: PDF | Quality: Original preprint | Publisher: AISC | Year: 2014 | pages: 392

Design Guide 29, Vertical Bracing Connections--Analysis and Design, provides guidance for the design of vertical brace connections. The guide includes an overview of the design philosophy of common bracing systems based on structural principles. Using the lower bound theorem of limit analysis and the uniform force method, the guide addresses: brace-to-gusset connection, orthogonal and nonorthogonal connections, chevron or K-bracing, eccentric braces, connections at column base plates, both nonseismic and seismic conditions, and gusset plate stability. Design Guide 29 also includes over a dozen extensive, complete design examples with every applicable limit state addressed.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator v2.2.0

[eng donny]

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

PASSWORD :

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[junaid]

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[Ernest0]

Design Guide 30: Sound Isolation and Noise Control in Steel Buildings

• Author(s): Benjamin Markham, LEED AP; Eric Ungar, Sc.D., P.E.
  
• Published By: AISC
  
• Published Year: 2015
  
• Size: 2.35 MB
  
• Quality: Original preprint
  
• Abstract: The new AISC Design Guide 30: Sound Isolation and Noise Control in Steel Buildings provides the design team with readily accessible background information and with guidance aimed at achieving acoustical conditions suitable for a building’s planned occupancies. It also discusses sound isolation in detail - including the related metrics, effects of structural parameters and acoustical treatments, the effects of "weak links" such as acoustically inappropriate windows and gaps at doors, and the isolation performance of wall configurations that are widely used in steel buildings.
  

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator V2.3.1

[temp1366]

Design Guide 30: Sound Isolation and Noise Control in Steel Buildings

Mirror:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator V2.3.1

[ESTRUCTO]

Aisc design guide 11 2nd edition.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[ESTRUCTO]

Hello. Here is another link with all the AISC Design Guides (1 to 30), including errata.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************