AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage

ir_71 · (This post was last modified: 03-31-2011, 06:07 AM by ir_71.)

AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory

This Standard sets out a method for preparing and curing of concrete shrinkage specimens, and for determining the length changes of these specimens due to drying in air. It provides for testing of specimens prepared in the laboratory or in the field, in which the nominal size of aggregate in the concrete, in accordance with AS 2758.1, does not exceed 40 mm. The precision statement in Clause 9 does not apply to specimens which have had non-standard initial curing (normally field-prepared specimens). In addition this Standard requires that field-prepared specimens are marked, recorded and reported as such.
NOTES:
This test method is not always suitable for very low slump concrete (less than 20 mm), primarily due to the difficulties in obtaining adequate compaction. Provided adequate compaction is obtained, the method is applicable. The method is specifically designed for measurement of drying shrinkage of concrete, but it is capable of adaptation for measurement of length changes of specimens subjected to a variety of environmental conditions.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

Amd.1 :1993 to AS 1012.13:1992 :

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

**lisine** · 10-01-2018, 11:02 AM

AS 1012.13-1992

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	AS 1012.2-1994 Methods of testing concrete - Preparation of concrete mixes in the la	ir_71	1	1,342	06-03-2014, 04:09 AM Last Post: ir_71
	DD ENV 1992-4:2000, Eurocode 2: Design of concrete structures - Part 4	Mohammad6299	0	1,022	04-20-2014, 10:33 AM Last Post: Mohammad6299
	PD CEN/TR 196-4:2007 Methods of testing cement	mybest	0	975	12-03-2011, 06:46 AM Last Post: mybest
	AS 1012.21-1999 Methods of testing concrete - Determination of water absorption and	ir_71	0	1,149	04-01-2011, 05:56 AM Last Post: ir_71
	AS 1012.20-1992 Methods of testing concrete - Determination of chloride and sulfate	ir_71	0	1,132	04-01-2011, 05:49 AM Last Post: ir_71
	AS 1012.19-2000 Methods of testing concrete - Accelerated curing of concrete comp	ir_71	0	989	04-01-2011, 05:39 AM Last Post: ir_71
	AS 1012.18-1996 Methods of testing concrete - Determination of setting time of fres	ir_71	0	968	04-01-2011, 05:32 AM Last Post: ir_71