05-25-2010, 01:22 PM
The Canadian Wood Council (CWC) is the association responsible for the development and dissemination of technical information on the use of wood products in construction. Ensuring that this information is in tune with technical change and users' needs requires constant vigilance.
The purpose of this fifth edition of the Wood Design Manual is to help the Canadian community design - architects, engineers, specification writers, teachers and students of these disciplines - to design wood structures with efficiency, economy and safety. It brings together, in a comprehensive but concise format, the essential information a designer needs for a wide range of wood structural elements and systems.
The information in the Wood Design Manual is based on the latest information available from the National Building Code of Canada (2005) and from CSA Standard 0-86-01 (2005) Engineering Design in Wood. Every effort has been made to ensure that the date and information in the Manual are accurate and complete. The CWC does not, however, assume any responsability for errors or omissions in the Manual nor for engineering plans or plans prepared from it.
Chapter 1: Introduction
Chapter 2: Bending Members
* General Information
* Sheathing and Decking
* Lumber Joists
* Engineered Joists Beams and Purlins
* Built-up Beams
* Two-way Bending Members
* Cantilevered Beams
Chapter 3: Compression Members
* General Information
* Stud Walls and Posts Columns
* Built-up Columns
Chapter 4: Tension Members
* General Information
* Lumber and Glulam
Chapter 5: Combined Loads
* General Information
* Stud Walls
Chapter 6: Bearing
* General Information
* Bearing Resistance of Wood
* Bearing Plates
Chapter 7: Fastenings
* General Information
* Nails and Spikes
* Bolts
* Drift Pins
* Lag Screws
* Timber Rivets
* Shear Plates and Split Rings
* Truss Plates
* Joist Hangers
* Framing Anchors
* Typical Connection Details
Chapter 8: Applications
* General Information
* Curved Clulam
* Timber Arches
* Pitched-tapered Beams
* Pyramidal, Domed and A-frame Buildings
* Heavy Timber Trusses
* Light Frame Trusses
* Permanent Wood Foundations
* Stressed-sin Panels
* Concrete Formwork
Chapter 9: Shearwalls and Diaphrams
* General Information
* Diaphragm Design
* Shearwall Design
Chapter 10: Design Fire Safety
* General Information
* Definitions
* Wood Construction
* Fire-resistance Rating
* Determining Fire-resistance Ratings
* Flame-spread Ratings
* Fire-retardant Treated Wood
Chapter 11: Reference Information
* General Information
* Section Index
Chapter 12: CSA Commentary(not included)
* Reliability-based Design
* Load Duration
* System modification Factors and Floor Vibration
* Sawn Lumber
* Glulam
* Structural Panels
* Composite Building Components
* Shearwalls and Diaphragms
* Fastenings
* Proprietary Structural Wood Products
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************