PREFACE
The Construction Project Engineering handbook is one of the Construction Engineering’s main references, set up to assist students now enrolled within the framework of the Civil Engineering Department – English Section of the Technical University of Civil Engineering of Bucharest.
The purpose of this present handbook is to present fundamental and practical information in the field of plain and reinforced concrete, ensuring that works are undertaken in an orderly manner, as sequence, and follow the required principles of execution.
The handbook covers the whole project cycle for workers, equipment, materials, procedures,organization and quality control for concrete, reinforced concrete and precast concrete, serving as a reference guide for general contractors, construction managers, specialty subcontractors, estimators,project engineers, project managers, construction superintendents, scheduling engineers, sales engineers, or inspectors.
The content of this book is arranged in 6 chapters that are summarized below.
Chapter 1. Concrete Mix Design, addresses the design requirements and methodology regarding selection and proportioning of ingredients for concrete to meet its desired properties for concrete works.
Chapter 2. Rate of Concrete Placement Rough Estimate, presents basic information and specifies simplified means of estimating concrete rate of placement in formwork.
Chapter 3. Concrete Formwork Design, specifies the materials, construction and removal of formwork and shoring made for wood and steel, including fundamental concepts and equations that are used to design and execute them.
Chapter 4. Concrete Maturity, provides an overview regarding concrete maturity determination,outlining current experience in relation to using an effective and rational method in evaluating in-situ concrete strength at different ages.
Chapter 5. Estimates, establishes guidance in describing methods, procedures, and formats for the preparation of construction project cost estimates, from planning phases through modification estimates during concrete construction.
Chapter 6. Concrete Warehouse Structural Frame Erection, provides information concerning planning, detailing, sequencing and erection of concrete warehouse structural frames using precast reinforced and prestressed concrete members.
O.G. Ilinoiu, Bucharest 2004
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Author(s)/Editor(s): by Arnold W. Hendry (Author) | Size: 27.6 MB | Format:PDF | Quality:Scanner | Publisher: Red Globe Press | Year: 1998 | pages: 309 | ISBN: 0333733096 - 978-0333733097
The second edition of this book offers the most comprehensive treatment of structural masonry currently available. The contents include consideration of the basic concepts of stability and safety of masonry structures, the strength of masonry materials in compression, shear and flexure, followed by chapters on composite action, accidental damage, reinforced and prestressed masonry, arches and the testing of materials.
About the Author
ARNOLD W. HENDRY is Professor Emeritus of Civil Engineering in the University of Edinburgh and a Past President of the British Masonry Society. For over thirty years his main field of research was structural masonry and he is the author of numerous papers and book on this subject. He served for many years on national and international committees engaged in the preparation of codes of practice and standards for masonry structures.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Fire Safety Design for Tall Buildings provides structural engineers, architects, and students systematic introductions to fire safety design for tall buildings based on current analysis methods, design guidelines, and codes. It covers almost all aspects of fire safety design that an engineer or an architect might encounter―such as performance-based design, the basic principles of fire development and heat transfer
This book also sets out an effective way of preventing the progressive collapse of a building in fire, and it demonstrates 3D modeling techniques to perform structural fire analysis with examples that replicate real fire incidents such as Twin Towers and WTC7. This helps readers to understand the design of structures and analyze their behavior in fire.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
A fully updated source for structural steel design information
Thoroughly revised for the latest advances, this comprehensive resource contains information essential to the design of steel structures. The book lays out the fundamentals of structural steel fabrication and erection followed by detailed design methods for steel beams, columns, tension components, roof systems, and connections. Design examples throughout the book clearly demonstrate how to apply complex code provisions in the field. You will get clear explanations of AISC 360-16, the AASHTO Standard Specification for Structural Steel Bridges, the AISI Cold-Formed Steel Standards, ASCE 7-16, and the 2018 IBC.
• Properties of structural steels
• Effects of steelmaking and fabrication
• Fabrication and erection
• Connections
• Building codes, loads, and fire protection
• Criteria for building design
• Design of building members
• Floor and roof systems
• Lateral-force design
• Cold-formed steel design
• Highway bridge design criteria
• Beam, girder, and truss bridges
• Arch and cable-suspended bridges
CONTRIBUTORS
Roger L. Brockenbrough, P.E., F.ASCE President, R. L. Brockenbrough & Associates, Inc., Pittsburgh, Pennsylvania (Chaps.
1, 5, 9)
Matthew A. Bunner, P.E. Vice President and Senior Professional Associate, HDR Engineering, Inc., Pittsburgh, Pennsylvania (Chap. 13)
Daniel A. Cuoco, P.E., F.ASCE Formerly, President and Chief Executive Officer, Thornton Tomasetti, Inc., New York, New York (Chap. 7)
David Goodyear, P.E., S.E., P.Eng. Senior Vice President and Chief Bridge Engineer, T. Y. Lin International, Olympia,Washington (Chap. 14)
Michael A. Grubb, P.E. Executive Director, M. A. Grubb and Associates, LLC, Wexford, Pennsylvania (Chap. 10)
Ali A. K. Haris, Ph.D., P.E. President, Haris Engineering, Inc., Overland Park, Kansas (Chap. 6)
Kaise Haris Structural Engineer, Haris Engineering, Inc., Overland Park, Kansas (Chap. 6)
Alfred Hedefine, P.E. Formerly, President, Parsons Brinckerhoff Quade & Douglas Inc., New York, New York (Chap. 11)
Nestor R. Iwankiw, Ph.D., P.E., S.E. Jensen Hughes, Chicago, Illinois (Chap. 4)
Leonard Joseph, P.E., S.E. Principal, Thornton Tomasetti, Inc., Los Angeles, California (Chap. 7)
R. A. LaBoube, Ph.D., P.E. Curators' Distinguished Teaching Professor Emeritus, Department of Civil, Architectural, and Environmental Engineering, Missouri University of Science & Technology, Rolla, Missouri (Chap. 9)
Kevin A. Mueller, Ph.D. Jensen Hughes, Chicago, Illinois (Chap. 4)
Larry S. Muir, P.E. Structural Steel Consultant (Chap. 3)
Christopher Pinto, P.E. Associate Principal, Thornton Tomasetti, Inc., New York, New York (Chap. 7)
Walter Podolny, Jr., Ph.D., P.E. Formerly, Senior Structural Engineer, Office of Bridge Technology, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C. (Chap. 14)
Charles W. Roeder, Ph.D., P.E. Professor of Civil Engineering, University of Washington, Seattle, Washington (Chap. 8)
Francesco M. Russo, Ph.D., P.E. Vice President and Technical Director, Bridge Engineering, Michael Baker International,Philadelphia, Pennsylvania (Chap. 10)
Thomas Schlafly Chief of Engineering Staff, American Institute of Steel Construction, Chicago, Illinois (Chap. 2)
Mahir Sen, P.E. Technical Principal, WSP USA, Inc., Lawrenceville, New Jersey (Chap. 11)
Todd J. Stephens, P.E. Senior Engineer, Modjeski and Masters, Inc., Mechanicsburg, Pennsylvania (Chap. 12)
Gregory R. Stolowski, P.E. Senior Structural Engineer, WSP USA, Inc., Lawrenceville, New Jersey (Chap. 11)
Vanessa L. Storlie, P.E. Senior Engineer, Modjeski and Masters, Inc., Mechanicsburg, Pennsylvania (Chap. 12)
John Swindlehurst, P.E. Formerly, Senior Professional Associate, Parsons Brinckerhoff Quade & Douglas Inc., Newark, New Jersey (Chap. 11)
William A. Thornton, Ph.D., P.E., NAE Corporate Consultant, Cives Corporation, Alpharetta, Georgia (Chap. 3)
Kenneth J. Wright, P.E. Senior Vice President and Senior Professional Associate, HDR Engineering, Inc., Pittsburgh,Pennsylvania (Chap. 13)
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Published By:Precast/Prestressed Concrete Institution
Published Year:August 2014
Size: 55.9 MB
Quality:Original Preprint
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
Posted by: concreteok - 01-13-2021, 06:56 AM - Forum: ISO
- No Replies
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
![[Image: 06424519348194242907.jpg]](https://pic.civilea.com/images/06424519348194242907.jpg)
![[Image: info.png]](http://postgen.civilea.com/icon/info.png){kind=icon}
![[Image: download.png]](http://postgen.civilea.com/icon/download.png){kind=icon}
![[Image: 31635587272088825080.jpg]](https://pic.civilea.com/images/31635587272088825080.jpg)
![[Image: 27128632565687917554.jpg]](https://pic.civilea.com/images/27128632565687917554.jpg)
![[Image: 46374960218821144675.jpg]](https://pic.civilea.com/images/46374960218821144675.jpg)
![[Image: 31456600053594242070.jpg]](https://pic.civilea.com/images/31456600053594242070.jpg)
![[Image: comments.png]](http://postgen.civilea.com/icon/comments.png){kind=icon}
![[Image: password.png]](http://postgen.civilea.com/icon/password.png){kind=icon}
