Reinforcing Bar Detailing A Heavily Illustrated Textbook Presenting Fundamentals and

[sabooryan]

Reinforcing Bar Detailing A Heavily Illustrated Textbook Presenting Fundamentals and Best Practices in the Preparation and Creation of Reinforced Concrete Placing Drawings and Related 5th Edition

Author(s)/Editor(s): CRSI | Size: 24.6 MB | Format: PDF | Quality: Original preprint | Publisher: CRSI | Year: 2015 | pages: 328

This book provides the basic knowledge for a Detailer of reinforcing bars, bar supports and welded wire reinforcement.
Detailing, described briefly, is the preparation of placing drawings complete with bar lists with sufficient information for:
(1) the Fabricator to fabricate the bars and to order (when required by the Contract) the bar supports and welded wire reinforcement; and (2) the Ironworkers to install these products at the jobsite.
The reader is shown how to translate and transfer the requirements presented on structural drawings and other documents onto a proper placing drawing. The language and form of the information are emphasized to achieve simplicity and efficiency for the end users - the Fabricator and the Ironworker.
This textbook is intended for use by technical schools, junior colleges, and for on-the-job training programs. It is assumed that the reader has completed basic courses in high school mathematics, including elementary algebra and plane geometry.
Trigonometry is desirable for the beginner and is necessary for more advanced training. The reader should have completed a course in elementary drafting and have some knowledge of blueprint reading. A course in computer-aided drafting (CAD)is recommended and will most likely be required by companies where CAD is in use. It is also recommended that the reader possess basic computer skills such as those used in data entry, word processing, and spreadsheet applications. Each reinforcing steel company may use somewhat different detailing practices and different formats for its placing drawings and bar lists to suit its particular operation. This textbook represents basic and generally accepted practices. Adjustments to a particular company’s system should be minor.
After completing Part I (Chapters 1 to 14), the Detailer should have an overall perspective to prepare for Part II (Chapters 15 to 18). In Part II, the actual study of reinforcing bar detailing begins.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator V2.3.1

[youssef]

Dead link

[malee]

PHP Code:

https://mega.nz/#!hwBy3ASJ!u2LiPtNXcI6clyYIGfmCGUrdyaeFtQE93eUBwMj-Mqg 


[BennyP]

@youssef
You remeber i don't like spammers ? Downloaded a few seconds before another user gave you another link.

[lisine]

Mirrors of book without "@Seismic..." on the bottom of every page.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[temp1366]

Mirror:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************