10-18-2009, 11:19 AM
(This post was last modified: 09-30-2011, 07:47 AM by Dell_Brett.)
Design rules for lateral torsional buckling of channel sections EC3 & DIN
(image edited)
info:
Channel sections are widely used in practice as beams. However, design rules for eccentrically loaded (not through shear centre) beams with channel cross-sections are not available in Eurocode 3. In this paper five proposed design rules are summarised, explained and their validity is checked by Finite Element analyses. The design rules yield ultimate loads that are compared to ultimate loads from geometrical and material nonlinear analyses of imperfect (GMNIA) beams with channel cross-sections. A parameter study is performed by varying the dimensions of the cross-section, the span length to section height ratio of the beams, the type of loading and the point of load application but is limited to load application through the web of the channels. Based on one of the proposed design rules, this study has led to a new design rule which conforms to Eurocode 3. This is a 10 pages article (a chapter).
Download Links:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Generate By Civilea PostGen V1.3