Equivalent slenderness ratio for built-up members

[asim99]

Equivalent slenderness ratio for built-up members

Author: MURRAYC . TEMPLEA ND GHADAE LMAHDY | Size: 270 KB | Format: PDF | Quality: Unspecified | Publisher: Canadian Journal of Civil Engineering | Year: 1992 | pages: 4

Built-up struts that buckle about an axis perpendicular to the plane of the connectors should be treated as a "built-up"
member as opposed to a "simple" member. This mode of buckling causes shear and moments in the connectors which
deform the connectors. These deformations increase the lateral deformation of the member and hence affect the load carrying
capacity. To account for this effect the easiest method is to use an equivalent slenderness ratio such as the
one included in the Canadian Standard. This note outlines the derivation of the equivalent slenderness ratio equation,
discusses when it should and should not be used, and includes a numerical example. A rewording of the applicable
clause in the Canadian Standard is suggested.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator v2.2.0