06-10-2012, 03:57 PM
(This post was last modified: 06-10-2012, 04:04 PM by NAUTILUS87.)
hello everyone ,
If anyone is having this publication in pdf format please , share it on civilea forum . It is a professional publication .
info:
Title : Design Manual For Designing Steel Structures According to New IS: 800
Publishers :INSTITUTE FOR STEEL DEVELOPMENT & GROWTH
Publication No. : INS/PUB/114
Handbook consists of 7 chapters and appendix which are as follows:
1. Standard Steel Sections-Dimension and Properties
2. Formula for Structural Analysis- Elastic and Plastic Analysis
3. Members under Tension
4. Compression Members-Design Strength
5. Members subjected to Bending
6. Design of Members subjected to combined compression and bending
7. Connections
Appendix: Design Tensile Strength, Design Compressive Strength, Design Bending and Shear
strength, Beam column, Connections
Publication will serve as a ready reckonner to the structural Engineers/ Consultants using structural steel for designing in Limit State Method (LSM). Manual contains tables and examples showing the use of tables that facilitates ease of design of steel structural elements. Appendix covers worked out examples considering various conditions of loading and cases. These are presented to illustrate the steps of designs without any accompanying tables. This will assist a design Engineers in learning the stipulations of new IS:800 (IS:800-2007) as well as checking design calculations as per the said code.
If anyone is having this publication in pdf format please , share it on civilea forum . It is a professional publication .
info:
Title : Design Manual For Designing Steel Structures According to New IS: 800
Publishers :INSTITUTE FOR STEEL DEVELOPMENT & GROWTH
Publication No. : INS/PUB/114
Handbook consists of 7 chapters and appendix which are as follows:
1. Standard Steel Sections-Dimension and Properties
2. Formula for Structural Analysis- Elastic and Plastic Analysis
3. Members under Tension
4. Compression Members-Design Strength
5. Members subjected to Bending
6. Design of Members subjected to combined compression and bending
7. Connections
Appendix: Design Tensile Strength, Design Compressive Strength, Design Bending and Shear
strength, Beam column, Connections
Publication will serve as a ready reckonner to the structural Engineers/ Consultants using structural steel for designing in Limit State Method (LSM). Manual contains tables and examples showing the use of tables that facilitates ease of design of steel structural elements. Appendix covers worked out examples considering various conditions of loading and cases. These are presented to illustrate the steps of designs without any accompanying tables. This will assist a design Engineers in learning the stipulations of new IS:800 (IS:800-2007) as well as checking design calculations as per the said code.