CivilEA.com
  • Subscribe !
  • Register
  • Login
  • Home
  • Members
  • Help
  • Search
Civil Engineering Association eBooks Codes, Manual & Handbook LRFD for Wood Construction

LRFD for Wood Construction
 Ultra Zone

Senior Member

Retired Moderator
El Salvador
User ID: 195
Joined: Jan 2009
Posts: 168
Threads: 102
Likes: 2,410 in 167 posts
Given Likes: 2238
Points:14,054 EP
#1
02-10-2009, 06:12 PM (This post was last modified: 08-24-2009, 06:25 PM by oanm2000.)
LRFD for Wood Construction ( Structural Use Panels )

This supplement contains adjustment factors, dimensions, factored resistance, reference strengths and other properties required to design structural-use panels in the LRFD format. In this format, the term “resistance” is used to refer to member capacities (i.e., moment resistance, compression resistance, etc.). This is distinct from the term “strength” which refers to limit state material properties — conceptually a “factored allowable stress.”

The member resistance values tabulated in this supplement are to be used in conjunction with the design methodologies provided in AF&PA/ASCE 16-95, Standard for Load and Resistance Factor Desig(LRFD) for Engineered Wood Construction.
The reference strengths were derived according to the principles of ASTM D5457-93, Standard Specification for Computing the Reference Resistance of Wood-based Materials and Structural Connections for Load and Resistance Factor Design.
The tabulated reference strength values are to be used within the reference end-use conditions defined therein. When the end-use conditions fall outside the range of the reference conditions, the reference values shall be adjusted by the product of applicable adjustment factors as defined in AF&PA/ASCE 16-95 and also provided in this supplement. For unusual end-use conditions, the designer should consult additional literature for possible further adjustments.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[Image: structuralusepanels.jpg?w=234&h=300]


LRFD for Wood Construction ( Structural Glued Laminated Timber )

This supplement contains adjustment factors, dimensions, factored resistance, reference strengths and other properties required to design structural glued laminated timber in the LRFD format. In this format, the term “resistance” is used to refer to member capacities (i.e., moment resistance, compression resistance, etc.). This is distinct from the term “strength” which refers to limit state material properties — conceptually a “factored allowable stress.”

The member resistance values tabulated in this supplement are to be used in conjunction with the design methodologies provided in AF&PA/ASCE 16-95, Standard for Load and Resistance Factor Design (LRFD) for Engineered Wood Construction.
The reference strengths were derived according to the principles of ASTM D5457-93, Standard Specification for Computing the Reference Resistance of Wood-based Materials and Structural Connections for Load and Resistance Factor Design. The tabulated reference strength values are to be used within the reference end-use conditions defined therein. When the end-use conditions fall outside the range of the reference conditions, the reference values shall be adjusted by the product of applicable adjustment factors as defined in AF&PA ASCE 16-95 and also provided in this supplement. For unusual end-use conditions, the designer should consult additional literature for possible further adjustments.

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[Image: structuralgluedlaminatedtimber.jpg?w=233&h=300]


LRFD for Wood Construction ( Example Problems )
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[Image: wood-example-problem.jpg?w=233&h=300]


________________________________________________________________

Post edited. All links are working
________________________________________________________________
Follow the Rules
Before post a Request, Book or Software
Use the SEARCH Engine for not duplicate info



[-] The following 5 users Like Ultra Zone's post:5 users Like Ultra Zone's post
  • andi jackson, NAUTILUS87, imatoric, fer962933, sivlad
« Next Oldest | Next Newest »

Users browsing this thread: 1 Guest(s)



Possibly Related Threads…
Thread Author Replies Views Last Post
  Wood Handbook- Wood as an Engineering Materials rendel_© 5 3,210 03-08-2017, 05:39 PM
Last Post: ir_71
  ANSI/AF&PA NDS-2005: National Design Specification for Wood Construction cmepe 6 4,492 03-27-2016, 03:37 AM
Last Post: RICARDI
  Egyptian Code of Practice for Steel Construction - LRFD 2008 AG.NAYEL 3 3,000 01-19-2016, 09:31 AM
Last Post: heogay43
  NATIONAL DESIGN SPECIFICATION (NDS) FOR WOOD CONSTRUCTION lucky_b2me 1 2,301 05-17-2010, 12:20 AM
Last Post: Badis

  • View a Printable Version
  • Subscribe to this thread

Designed by CivilEA - Powered by MyBB

Linear Mode
Threaded Mode