Best Practice in Steel Construction

jorgeramos · (This post was last modified: 12-07-2009, 07:08 PM by Dell_Brett.)

Best Practice in Steel Construction - Residential Buildings

This publication presents best practice for the design of steel construction
technologies used in residential buildings, and is aimed at architects and other
members of the design team in the early stages of planning a residential
building project. It was prepared as one of a series of three under an RFCS
dissemination project Euro-Build in Steel (Project n° RFS2-CT-2007-00029).
The project’s objective is to present design information on best practice in steel,
and to take a forward look at the next generation of steel buildings. The other
publications cover best design practice in commercial and residential buildings.

[Image: Download.png]

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

**Dell_Brett** · 12-07-2009, 06:48 PM

Other alternative link (direct download):

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Regards

Dell Brett

ir_71 · (This post was last modified: 12-13-2011, 08:50 PM by usman.)

SCI EP35 Best Practice in Steel Construction - Commercial Buildings

This publication presents best practice for the design of steel construction technologies used in commercial buildings, and is aimed at architects and other members of the design team in the early stages of planning a commercial building project. It was prepared as one of a series of three under an RFCS dissemination project Euro-Build in Steel (Project n° RFS2-CT-2007-00029).
The project’s objective is to present design information on best practice in steel, and to take a forward look at the next generation of steel buildings. The other publications cover best design practice in industrial and residential buildings.
The Euro-Build project partners are:
ArcelorMittal
Bouwen met Staal
Centre Technique Industriel de la Construction Métallique (CTICM)
Forschungsvereinigung Stahlanwendung (FOSTA)
Labein Technalia
SBI
The Steel Construction Institute (SCI)
Technische Universität Dortmund
Although care has been taken to ensure, to the best of our knowledge, that all data and information contained herein are accurate to the extent that they relate to either matters of fact or accepted practice or matters of opinion at the time of publication, the partners in the Euro-Build project and the reviewers assume no responsibility for any errors in or misinterpretations of such data and/or information or any loss or damage arising from or related to their use.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

ir_71 · (This post was last modified: 12-13-2011, 08:51 PM by usman.)

SCI EP37 Best Practice in Steel Construction - Industrial Buildings

This publication presents best practice for the design of steel construction technologies used in industrial buildings, and is aimed at architects and other members of the design team in the early stages of planning an industrial building project. It was prepared as one of a series of three under an RFCS dissemination project Euro-Build in Steel (Project n° RFS2-CT-2007-00029).
The project’s objective is to present design information on best practice in steel, and to take a forward look at the next generation of steel buildings. The other publications cover best design practice in commercial and residential buildings.
The Euro-Build project partners are:
ArcelorMittal
Bouwen met Staal
Centre Technique Industriel de la Construction Métallique (CTICM)
Forschungsvereinigung Stahlanwendung (FOSTA)
Labein Tecnalia
SBI
The Steel Construction Institute (SCI)
Technische Universität Dortmund
Although care has been taken to ensure, to the best of our knowledge, that all data and information contained herein are accurate to the extent that they relate to either matters of fact or accepted practice or matters of opinion at the time of publication, the partners in the Euro-Build project and the reviewers assume no responsibility for any errors in or misinterpretations of such data and/or information or any loss or damage arising from or related to their use.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

mowafi3m · (This post was last modified: 10-09-2012, 07:06 PM by oanm2000.)

Best Practice in Steel Construction - Commercial Buildings

This publication presents best practice for the design of steel construction technologies used in commercial buildings, and is aimed at architects and other members of the design team in the early stages of planning a commercial building project. It was prepared as one of a series of three under an RFCS dissemination project Euro-Build in Steel (Project n° RFS2-CT-2007-00029).
The project’s objective is to present design information on best practice in steel, and to take a forward look at the next generation of steel buildings. The other publications cover best design practice in industrial and residential buildings.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.1

Best Practice in Steel Construction - Industrial Buildings

The Steel Construction Institute (SCI) develops and promotes the effective use of steel in construction. It is an independent, membership based organisation. SCI’s research and development
activities cover multi-storey structures, industrial buildings, bridges, civil engineering and offshore engineering. Activities encompass design guidance on structural steel, light steel and stainless steels, dynamic performance, fire engineering, sustainable construction, architectural design, building physics (acoustic and thermal performance), value engineering, and information technology.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.1

Best Practice in Steel Construction - Residential Buildings

The design of housing and residential buildings is influenced by many factors, including new requirements for sustainability, and thermal and acoustic performance. The environmental need to conserve land use, whilst improving the social characteristics of the built environment, also have a direct effect on the choice of constructional system.
The pressure for more efficient and sustainable construction processes to meet these challenges has led to a demand for higher degrees of prefabrication and improved quality in the performance of the chosen construction technology.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.1

LiviuM · 10-09-2012, 11:35 AM

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Best Practice Guidance for Hybrid Concrete Construction	ir_71	1	5,094	08-17-2018, 09:52 PM Last Post: gulilero
	Australian Steel Institute - Steel Construction Journals	adams	3	10,097	05-05-2015, 10:52 AM Last Post: monter