Response and Analysis of a Large Diameter Drilled Shaft Subjected to Lateral Loading
Author: Tong Qiu, Patrick J. Fox, Kerop Janoyan, Jonathan P. Stewart and John W. Wallace | Size: 1 MB | Format: PDF | Quality: Original preprint | pages: 12
Numerical analyses are presented for the response of a 2 m diameter drilled shaft with flagpole configuration subjected to lateral loading. The analyses were conducted using three software programs: LPILE (subgrade reaction model), SWM (strain wedge model), and ABAQUS (3-D finite element model). The analyses consider nonlinear behavior of the reinforced concrete shaft, contact-slip-gap at the soil-shaft interface, and elastic-plastic properties of the soil. Numerical results are compared with measurements from a full-scale field test for the shaft and include lateral displacement at the top of the shaft, subgrade reaction (p-y) curves at three depths, and distributions of bending moment and shear force along the shaft.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
[align=left]This post has been made by CivilEA Post-Generator ver 2.1.6
An Engineer must have a SIX sense