Reinforced Masonry Engineering Handbook Clay and Concret, Sixth Edition.

[betinnn]

Reinforce Masonry Engineering Handbook

Author: James E. Amrhein, S.E. , Max L. Porter, P.E., Ph.D. | Size: 41.6 MB | Format: PDF | Publisher: Masonry Institute Of America and International Code Council | Year: 2009 | pages: 593 | ISBN: 0-940116-02-2

Portions of this publication are reproduced, with permission, from the 2006 International Building Code, copyright ©
International Code Council, the ASCE/SEI 7-05 Minimum Design Loads for Buildings and Other Structures, copyright ©
American Society of Civil Engineers, ACI 530-05/ASCE 5-05/TMS 402-05 Building Code Requirements for Masonry
Structures, copyright © American Concrete Institute, American Society of Civil Engineers, The Masonry Society.
In this publication the Masonry Standards Joint Committee’s (MSJC) Building Code Requirements for Masonry Structures
(ACI 530/ASCE 5/TMS 402 is hereafter referred to as the MSJC Code, and the MSJC’s Specification for Masonry
Structures (ACI 530.1/ASCE 6/TMS 602) is hereafter referred to as the MSJC Specification.
This book was prepared in keeping with current information and practice for the present state of the art of masonry design
and construction.
The author, publisher and all organizations and individuals who have contributed to this book cannot assume or accept any
responsibility or liability, including liability for negligence, for errors or oversights in this data and information and in the use
of such information.
ALL RIGHTS RESERVED: This publication is a copyright work owned by the Masonry Institute of America and the
International Code Council. Without advance written permission from the copyright owners, no part of this book may be
reproduced, distributed or transmitted in any form or by any means, including, without limitation, electronic, optical or
mechanical means (by way of example and no limitation, photocopying, or recording by or in an information storage and
retrieval system). For information on permission to copy material exceeding fair use, please contact: Masonry Institute of
America, 22815 Frampton Ave., Torrance, CA 90501-5034, Phone: 800-221-4000 or ICC Publications, 500 New Jersey
Avenue, NW, 6th Floor, Washington, DC 20001-2070, Phone: 888-ICC-SAFE (422-7233).
Information contained in this document has been obtained by the Masonry Institute of America (MIA) from sources believed
to be reliable. Neither MIA nor its authors shall be responsible for any errors, omissions, or damages arising out of this
information. This work is published with the understanding that MIA and its authors are supplying information but are not
attempting to render professional services. If such services are required, the assistance of an appropriate professional
should be sought.
Trademarks: “Masonry Institute of America”, and the MIA logo, “International Code Council” and the ICC logo are
trademarks of the Masonry Institute of America and the International Code Council, Inc. respectively.
First Printing: September 2009
Printed in the United States of America

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

No Password

Made By CivilEA Post-Generator ver 2.1

[shadabg]

Reinforced Masonry Engineering Handbook, 6th Edition, is based on the requirements of the 2006 IBC, the Building Code Requirements for Masonry Structures (ACI 530-05/ASCE 5-05/TMS 402-05) and ASCE 7-05. This book is useful to designers of reinforced masonry in eliminating repetitious and routine calculations. Detailed explanations and applications of Allowable Stress Design and Strength Design procedures are presented. More than 70 step-by-step examples are provided, including a one-story building and a seven story building. This book is intended to assist the practitioner in understanding and applying masonry design.

This book addresses essential information on:
• Materials
• Masonry Assemblage, Strengths and Properties
• Loads
• Distribution and Analysis for Lateral Forces
• Design of Structural Members by Allowable Stress Design
• Design of Structural Members by Strength Design
• Details of Reinforcing Steel
• Building Details, and
• Much More 648 Pages Hard Cover Publication


Active Links :

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[arshiakh]

Direct link:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[DavidMV]

ANY OTHER LINKS
THANKS