04-15-2011, 05:27 AM
ISO 22965-2 Concrete — Part 2: Specification of constituent materials, production of concrete and compliance of concrete
Size: 0.3 MB | Format: PDF | Publisher: ISO | Year: 2007 | pages: 48
This part of ISO 22965 applies to concrete for structures cast in situ, pre-cast structures and structural pre-cast products for buildings and civil engineering structures. The concrete can be mixed on site, ready-mixed concrete or produced in a plant for pre-cast concrete products.
This part of ISO 22965 applies to concrete compacted to retain no appreciable amount of entrapped air other than entrained air and to normal-weight, heavy-weight and light-weight concrete. Other International Standards for specific products, e.g. pre-cast products, or for processes within the field of the scope of this standard can require or permit deviations from this part of ISO 22965. This part of ISO 22965 specifies the properties of constituent materials, the production of concrete and the compliance system of concrete.
This part of ISO 22965 does not apply to:
⎯ concrete with a maximum aggregate size equal to or less than 4 mm or 5 mm (mortar),
⎯ aerated concrete,
⎯ foamed concrete,
⎯ concrete with an open structure (“no-fine aggregate” concrete),
⎯ concrete with a density less than 800 kg/m3,
⎯ refractory concrete.
This part of ISO 22965 does not cover health and safety requirements for the protection of workers during production and delivery of concrete.
This part of ISO 22965 applies to concrete compacted to retain no appreciable amount of entrapped air other than entrained air and to normal-weight, heavy-weight and light-weight concrete. Other International Standards for specific products, e.g. pre-cast products, or for processes within the field of the scope of this standard can require or permit deviations from this part of ISO 22965. This part of ISO 22965 specifies the properties of constituent materials, the production of concrete and the compliance system of concrete.
This part of ISO 22965 does not apply to:
⎯ concrete with a maximum aggregate size equal to or less than 4 mm or 5 mm (mortar),
⎯ aerated concrete,
⎯ foamed concrete,
⎯ concrete with an open structure (“no-fine aggregate” concrete),
⎯ concrete with a density less than 800 kg/m3,
⎯ refractory concrete.
This part of ISO 22965 does not cover health and safety requirements for the protection of workers during production and delivery of concrete.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************