INSDAG GUIDE FOR THE STRUCTURAL USE OF STEELWORK IN BUILDINGS
Author: Dr. Rangachari Narayanan Dr. V. Kalyanraman | Size: 10.3 MB | Format: PDF | Publisher: INSDAG | Year: 2003 | pages: 198
This Guide provides general recommendations for the design of structural steel work in buildings and allied structures. In the absence of an Indian Standard written in the modern Limit State Format for steel construction, this guide generally follows the provisions contained in British Standard, BS: 5950 (various parts). INSDAG has a Memorandum of Understanding with the British Steel Construction Institute and several supporting documents are available from INSDAG at largely discounted prices for the use of steel designers in India. It will not apply to bridges, chimneys, cranes, tanks, transmission line towers, storage structures, tubular structures, however, general .principles discussed in this guide could be adopted in the design of such structures appropriately. This guide is in three parts and covers the design of building structures using (i) Hot Rolled Steel section (ii) Cold Rolled Steel sections and (iii) Steel Concrete Composite sections. The guide provides only general advice regarding the various loads to be considered in design. For actual loads to be used reference may be made to IS: 875-1987. This document is NOT a statutory document and intended as a guide for students and practicing engineers. It is not intended to replace Codes of Practice.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************