09-23-2010, 04:08 AM
DeadLord,
You could draw the curve beams with slab elements.
The different between beam and slab in RAM concept is that, by default,
(The beams properties do not restrain the torsion, but slab does.)
Then release the torsional restrained of the slab (which you draw as beam), that will give you same result and per the segmental beams.
Goober,
Concept does design beams, both RC and PT beams.
However, i do not recommend adding the columns at the curve beam.
You could draw the curve beams with slab elements.
The different between beam and slab in RAM concept is that, by default,
(The beams properties do not restrain the torsion, but slab does.)
Then release the torsional restrained of the slab (which you draw as beam), that will give you same result and per the segmental beams.
Goober,
Concept does design beams, both RC and PT beams.
However, i do not recommend adding the columns at the curve beam.