Geotechnical Engineering Calculations and Rules-of-Thumb

[hodzicemir]

Geotechnical Engineering Calculations and Rules of Thumb

Author(s)/Editor(s): Ruwan Abey Rajapakse | Size: 31,7 MB | Format: PDF | Quality: Unspecified | Publisher: Butterworth-Heinemann | pages: 492 | ISBN: 9780750687645

Geotechnical Engineering Calculations Manual offers geotechnical, civil and structural engineers a concise, easy-to-understand approach the formulas and calculation methods used in of soil and geotechnical engineering. A one stop guide to the foundation design, pile foundation design, earth retaining structures, soil stabilization techniques and computer software, this book places calculations for almost all aspects of geotechnical engineering at your finger tips. In this book, theories is explained in a nutshell and then the calculation is presented and solved in an illustrated, step-by-step fashion. All calculations are provided in both fps and SI units. The manual includes topics such as shallow foundations, deep foundations, earth retaining structures, rock mechanics and tunnelling. In this book, the author's done all the heavy number-crunching for you, so you get instant, ready-to-apply data on activities such as: hard ground tunnelling, soft ground tunnelling, reinforced earth retaining walls, geotechnical aspects of wetland mitigation and geotechnical aspects of landfill design.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator V2.3.1

[camto2]

Mirror:

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[bigone]

Geotechnical Engineering Calculations and Rules-of-Thumb by Ruwan Rajapakse,1st Ed. 2008, 0750687649

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[rami1976]

Geotechnical Engineering Calculations and Rules of Thumb, 2nd Edition

Author(s)/Editor(s): Rajapakse, Ruwan Abey | Size: 39 MB | Format: PDF | Quality: Original preprint | Publisher: Elsevier | Year: 2015 | pages: 464 | ISBN: 9780128046982

Geo technical Engineering Calculations and Rules of Thumb, Second Edition, offers Geo technical, civil and structural engineers a concise, easy-to-understand approach to selecting the right formula and solving even most difficult calculations in Geo technical engineering. A "quick look up guide", this book places formulas and calculations at the reader’s finger tips. In this book, theories are explained in a "nutshell" and then the calculation is presented and solved in an illustrated, step-by-step fashion. In its first part, the book covers the fundamentals of Geo technical Engineering: Soil investigation, condition and theoretical concepts. In the second part it addresses Shallow Foundations, including bearing capacity, elastic settlement, foundation reinforcement, grillage design, footings, geogrids, tie and grade beams, and drainage. This session ends with a chapter on selecting foundation types. The next part covers Earth Retaining Structures and contains chapters on its basic concepts and types, gabion walls and reinforced earth walls. The following part covers Geotechnical Engineering Strategies providing coverage of software, instrumentation, excavations, raft design, rock mechanics, dip angle and strike, rock stabilization equipment, soil anchors, tunnel design, seismology, Geo synthetics, and slurry cutoff walls. The final part is on Pile Foundations including content on design on sandy soils, clay soils, pin piles, negative skin friction, caissons and pile clusters. In this new and updated edition the author has incorporated new software calculation tools, current techniques for foundation design, liquefaction information, seismic studies, laboratory soil tests, geophysical techniques, new concepts for foundation design and Dam designs. All calculations have been updated to most current material characteristics available in the market. Practicing Geotechnical, Civil and Structural Engineers may find in this book an excellent companion to their day-to day work, benefiting from the clear and direct calculations, examples, and cases.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator V2.3.1