[REQUEST] Design, Testing, and Operation of a Sand-jack

[gulilero]

If anyone has access to the Australian Journal of Structural Engineering I will greatly apreciate a copy of the following article:

Design, Testing, and Operation of a Sand-jack

Australian Journal of Structural Engineering, Vol. 5, No. 3, 2004: 211-214

Authors: Keays, Russell; Diment, Ron


Thanks.

[Mohammad6299]

Design, testing, and operation of a sand-jack

• Author(s): Russell Keays, Ron Diment
  
• Published By: Australian Journal of Structural Engineering
  
• Published Year: 2004
  
• DOI: 10.1080/13287982.2004.11464939
  
• Size: 307 KB
  
• Quality: Original preprint
  
• Related Link:
  Private Note:
  

  http://www.tandfonline.com/doi/abs/10.10...4.11464939
  
  
  
• Abstract: Sand jacks are used to support the weight of bridge works during construction because they are cheap, reliable, and easy to remove once their purpose has been served. When the writers had a need for several 1000kN capacity jacks, they found no published data on their design and construction. In particular, there was no information on their stiffness, which was important to the particular application. This Technical Note sets down the design method adopted, and the results of testing of the prototype jack. Some comments on the operation of the jacks are included.
  

Code:

Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

Code:

Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

Code:

Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈


This post has been made by CivilEA Post-Generator V2.3.1