DETAILING OF PLASTIC HINGES IN SEISMIC DESIGN OF CONCRETE STRUCTURES

[TAFATNEB]

DETAILING OF PLASTIC HINGES IN SEISMIC DESIGN OF CONCRETE STRUCTURES

Author: Rajesh P Dhakal and Richard C Fenwick Department of Civil and Natural Resources Engineering, University of Canterbury Christchurch 8020, New Zealand | Size: 310 KB | Format: PDF | Quality: Unspecified | pages: 23

In recent revisions of the Structural Design Codes in New Zealand, a number of changes have been made to seismic design provisions. One of the more significant revisions was the way in which the level of detailing is determined for potential plastic hinges. Previously the level of detailing was based principally on the structural ductility factor, which is broadly similar to the reduction factor, R, used in US practice. With the revision it is based on the predicted magnitude of curvature that the plastic hinge is required to sustain in the ultimate limit state. This paper explains why the structural ductility factor does not give a reliable guide to the deformation sustained in an individual plastic hinge. In addition, based on test results of 37 beams, 25 columns and 36 walls, design curvature limits are proposed for different categories of plastic hinge.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator v2.2.0