CivilEA.com
  • Subscribe !
  • Register
  • Login
  • Home
  • Members
  • Help
  • Search
Civil Engineering Association eBooks Journals, Papers and Presentations Slenderness ratio of main members between interconnectors of built-up compression mem

Slenderness ratio of main members between interconnectors of built-up compression mem
 asim99

Not-Activated

Pakistan
User ID: 9774
Joined: Oct 2009
Posts: 603
Threads: 476
Likes: 6,383 in 594 posts
Given Likes: 377
Points:54,091 EP
#1
04-05-2013, 03:40 AM
Slenderness ratio of main members between interconnectors of built-up compression members

Author: Murray C. Temple and Ghada M. Elmahdy | Size: 583 KB | Format: PDF | Quality: Unspecified | Publisher: Canadian Journal of Civil Engineering | Year: 1996 | pages: 11


[Image: info.png]

Many steel design standards, including CANICSA-S16.1-M89 "Limit states design of steel structures,"
specify maximum slenderness ratios for the individual main members between the interconnectors of built-up
compression members. Previous research on which these requirements are based is reviewed. It is shown that the
imperfection sensitivity due to coupled instabilities is measured from bifurcation critical loads. However, steel standards
are based on a compressive resistance determined for a member with an initial out-of-straightness and a suitable residual
stress pattern. It is shown that the use of an equivalent slenderness ratio equation is sufficient to predict the compressive
resistance of these built-up members. Further restrictions on the slenderness ratio of built-up members between
inter connectors are not warranted. Thus, the elimination of these requirements from S16.1-94 is justified.

[Image: download.png]
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************


This post has been made by CivilEA Post-Generator v2.2.0



[-] The following 6 users Like asim99's post:6 users Like asim99's post
  • Dell_Brett, malc, Hengki, slowet, kowheng, tluc
« Next Oldest | Next Newest »

Users browsing this thread: 1 Guest(s)



Possibly Related Threads…
Thread Author Replies Views Last Post
  Buckling of built-up compression members in the plane of the connectors asim99 2 5,601 12-12-2014, 04:39 PM
Last Post: Veggeta
  BEHAVIOUR OF STEEL SINGLE ANGLE COMPRESSION MEMBERS AXIALLY LOADED THROUGH ONE LEG asim99 1 3,809 10-15-2014, 11:00 PM
Last Post: KhaLed-S.E
  Design of Cold Formed Steel Unequel Angle Compression Members darkdkay 2 5,520 10-15-2014, 10:51 PM
Last Post: KhaLed-S.E
  Equivalent slenderness ratio for built-up members asim99 0 3,175 04-05-2013, 03:36 AM
Last Post: asim99
  Design Rules of Built‐Up Members in Load and Resistance Factor Design asim99 0 3,220 04-03-2013, 04:22 PM
Last Post: asim99

  • View a Printable Version
  • Subscribe to this thread

Designed by CivilEA - Powered by MyBB

Linear Mode
Threaded Mode