[REQUEST] Worked examples according to EN1993-1-3

[LiviuM]

Worked examples according to EN1993-1-3

Author: ECCS TC7 TWG 7.5 | Size: - MB | Format: PDF | Quality: Unspecified | Publisher: ECCS | Year: 2008 | pages: 235 | ISBN: 92-9147-000-86

Eurocode 3, Part 1.3, Supplementary rules for cold formed members and sheeting (EN 1993-1-3:2004) has been published. This standard replaces pre-standard ENV 1993-1-3:1996 and contains updates and revisions to the pre-standard ENV 1993-1-3.

ECCS has published document No. 114 Preliminary worked examples according to Eurocode 3 Part 1.3 (2000) prepared by ECCS TC 7 using the pre-standard ENV 1993-1-3. The original aim was to check the applicability and accuracy of the pre-standard and assist the practical use of the provisions.

This new publication replaces ECCS document No. 114. The examples have been updated following the provisions given in EN 1993-1-3. Some new examples have been also included. These examples show applicability of design provisions in EN 1993-1-3 in practice. They also help in interpretation of the guidance given in the code.

Chapter 2 contains examples related to one industrial building. Different aspects related to the design of structural components have been included.
-Example A: Roof sheeting
-Example B: Liner trays
-Example C: Purlins
-Example D: Portal frames
-Example E: End wall and wind bracing

Chapter 3 contains additional examples for specific structural elements or features of EN 1993-1-3, which are included to assist in practical use of the provision.
-Example F: C-section in compression and bending about axis of symmetry
-Example G. U-section in bending and compression
-Example H: C-section in compression
-Example I: Hat section upper chord of lattice girder
-Example J: Sheeting with stiffeners in flange and web
-Example K: Inelastic reserve of sheeting
-Example L: Double C-section as end column

The calculations are based on the provisions of EN 1993-1-3. Also parts EN 1993-1-5 and EN 1993-1-1 are required in the calculations. In some cases engineering judgement has been followed. If other methods in addition to Eurocode 3 have been used it has been clearly noted in the examples.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

[lisine]

Here

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************