01-17-2013, 02:48 PM
BS EN ISO 14122 Safety of machinery — Permanent means of access to machinery - Parts 1-4
Size: 1.36 MB | Format: PDF | Quality: Original preprint | Year: 2001, 2004 | pages: 18+16+24+46
This standard defines the general requirements for safe access to machines and gives advice about the correct choice of access means when the necessary access to the machine is not possible directly from the ground level or from a floor.
This standard applies to all machinery (stationary and mobile) where fixed means of access are necessary, and to fixed ladders, which are a part of a machine.
It may be applied to fixed ladders to that part of the building where the machine is installed, providing the main function of that part of the building is to provide a means of access to the machine.
This part also applies to ladders which are not permanently fixed to the machine and which may be removed, moved to the side or pivoted (swivel-mounted) for some operations of the machine (e. g. changing tools in a large press).
BS EN ISO 14122 consists of the following parts, under the general title "Safety of machinery - Permanent means of access to machinery" :
• Part 1 : Choice of a fixed means of access between two levels
• Part 2 : Working platforms and walkways
• Part 3 : Stairs, stepladders and guard-rails
• Part 4 : Fixed ladders.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************