AS/NZS 4672:2007 Parts 1 and 2 Steel prestressing materials

ir_71 · (This post was last modified: 12-22-2010, 05:54 AM by ir_71.)

This Standard specifies requirements for high tensile strength steel tendons to be used for
prestressing concrete and for other similar purposes (e.g., masonry structures). It applies
only to tendons in the condition as supplied by the manufacturer. It does not cover
requirements for anchorage devices (see Note 1) and materials used in conjunction with the
prestressing steel in structural components.
The specific properties for each type of prestressing steel are given in Sections 2 to 6,
namely:
(a) Section 2, As-drawn (mill coil) wire.
(b) Section 3, Stress-relieved wire.
© Section 4, Quenched and tempered wire.
(d) Section 5, Strand.
(e) Section 6, Hot-rolled bars with or without subsequent processing.
NOTES:
1 Anchorage devices are covered by AS/NZS 1314.
2 Advice and recommendations on information to be supplied by the purchaser at the time of
enquiry and order are contained in the purchasing guidelines set out in Appendix A.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

AS/NZS 4672:2007 Parts 1 and 2 Steel prestressing materials

This Standard sets out the minimum rate of testing of wire, strand and bar for prestressing
of permanent structures necessary to comply with the requirements of AS/NZS 4672.1.
NOTE: Manufacturing control should apply to all aspects of production from steel melting to the
dispatch of the final product.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Australian Standard AS 1391—2007 Metallic materials—Tensile testing at ambient temper	ir_71	1	1,307	01-11-2020, 09:11 AM Last Post: lisine
	Handbook of Materials Modeling parts A and B	ir_71	1	880	12-02-2010, 06:24 AM Last Post: ir_71