XTRACT and Perforrm 3D power point
Current time: 09-17-2021, 11:44 PM
Users browsing this thread: 1 Guest(s)
Author: benny
Last Post: simanta
Replies 2
Views 3595

XTRACT and Perforrm 3D power point
In what thread i can post the power point presentation entitled "Seismic Performance Assessment of RC Moment Resisting Frame Building" that I have prepared?

The introduction of the presentation is:

Buildings are designed per building code regulations, aptly termed Prescriptive Based Design. It is a methodology based upon meeting all of the specific requirements of the code.

In prescriptive based design, the normal engineering analysis practice is to assume linear-elastic behavior for structural members, which fails to reliably account for redistribution of forces due to member nonlinear behavior and dissipation of energy due to material yielding. Because of this, considerable damage has been observed and life safety goals was not achieved from major earthquakes in recent decades in residential and commercial buildings. Safety is understood as the structures ability to deform in the inelastic range but no collapsed is allowed.

During high seismic excitation, the building generally responds well beyond its elastic and linear capacity. There are two inelastic nonlinear options available for assessing the performance of a structure subjected to earthquake load; namely Pushover Analysis and Inelastic Nonlinear Time History Analysis. These two methods of analyses are used in Performance Based Design. It is a methodology using advanced engineering tools and methods to provide solutions to complex life safety problems in order to achieved life safety goals.

The purpose of this presentation is to explain the procedure in performing Inelastic Nonlinear Analysis using the professional software XTRACT v3.0.8 and PERFORM-3D v4.0.3, to evaluate the performance of multi-storey buildings (designed by traditional linear static and linear dynamic load procedures) when subjected to earthquake ground motion.
[-] The following 12 users say Thank You to benny for this post:
  • oanm2000, oanm2000, Grunf, Grunf, ruaumoko, ruaumoko, simanta, simanta, lucky_b2me, lucky_b2me, jonev, ghafoory
I think "Ebooks" section will be appropriate
I am very interested in your work, as I worked on a research for the National Annex to the Bulgarian Seismic Code about the capacities of the chord rotations in columns, beams and shear walls, including their ductility, according EC8-3.
[-] The following 5 users say Thank You to ivanveliki for this post:
  • Administrator , Administrator , oanm2000, oanm2000, jonev
dear benny,
Good works. Pls let me know when your presentation has been upload.
[-] The following 2 users say Thank You to simanta for this post:
  • GROUT, jonev

Users browsing this thread: 1 Guest(s)