05-14-2010, 02:02 AM
Hi all members,
I really need your help for finding some papers in the list below for my thesis references.
Thanks for your support.
1.Priestley, M.J.N. (1998). Brief Comments on Elastic Flexibility of Reinforced Concrete Frames, and Significance to Seismic Design. Bulletin, NZ National Society for Earthquake Engineering, 31(3)
2.Priestley, M.J.N. (2000). Peformance Based Seismic Design. Keynote address, Proceedings of the 12th World Conference on Earthquake Engineering
3.Albanesi, T., Nuti, C. and Vanzi, I. [2000] \A simplied procedure to assess the seismic response of nonlinear structures," Earthq. Spectra 16(4), 715{734.
4.Aschheim, M. A. and Black, E. F. [2000] \Yield point spectra for seismic design and rehabilitation," Earthq. Spectra 16(2), 317{336
5.Emori, K. and Schnobrich, W. C. [1978] \Analysis of reinforced concrete rame-wall struc-
tures for strong motion earthquakes," Civil Engineering Studies, Structural Research Series No. 434, University of Illinois, Urbana, Illinois.
6.Freeman S. A. [1978] \Prediction of response of concrete buildings to severe earthquake motion," ACI Special Publication SP-55, 589{605.
7.King, D. J., Priestley, M. J. N. and Park, R. [1986] \Computer programs for concrete column design," Res. Report 86/12, Department of Civil Engineering, University of Canterbury, New Zealand.
8.Paret, T. F, Sasaki, K. K., Eilbekc, D. H. and Freeman, S. A. [1996] \Approximate inelasticprocedures to identify failure mechanisms from higher mode eects," 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
9.Priestley, M. J. N. and Calvi, G. M. [1997] \Concepts and procedures for direct displacement- based design," Seismic Design Methodologies for the Next Generation of Codes, Fajfar and Krawinkler (eds.), Balkema, Rotterdam, pp. 171{181.
10.Priestley, M. J. N. and Kowalsky, M. J. [1998] \Aspects of drift and ductility capacity of cantilever structural walls," Bull. New Zealand Nat. Soc. Earthq. Engrg. 31(2).
11.Priestley, M. J. N. and Kowalsky, M. J. [2000] \Direct displacement-based design of concrete buildings," Bull. New Zealand Nat. Soc. Earthq. Engrg. 33(4).
13. Qi, X. and Moehle, J. P. [1991] \Displacement design approach for reinforced concrete structures subjected to earthquakes," Struct. Res. Series No. 413, Civ. Eng. Studies, University of Illinois, Urbana, Illinois.
14.Shimazaki, K. and Sozen, M. A. [1984] \Seismic drift of reinforced concrete structures,"Tech. Res. Rep. Of Hazama-Gumi, Tokyo, pp. 145{166.
I really need your help for finding some papers in the list below for my thesis references.
Thanks for your support.
1.Priestley, M.J.N. (1998). Brief Comments on Elastic Flexibility of Reinforced Concrete Frames, and Significance to Seismic Design. Bulletin, NZ National Society for Earthquake Engineering, 31(3)
2.Priestley, M.J.N. (2000). Peformance Based Seismic Design. Keynote address, Proceedings of the 12th World Conference on Earthquake Engineering
3.Albanesi, T., Nuti, C. and Vanzi, I. [2000] \A simplied procedure to assess the seismic response of nonlinear structures," Earthq. Spectra 16(4), 715{734.
4.Aschheim, M. A. and Black, E. F. [2000] \Yield point spectra for seismic design and rehabilitation," Earthq. Spectra 16(2), 317{336
5.Emori, K. and Schnobrich, W. C. [1978] \Analysis of reinforced concrete rame-wall struc-
tures for strong motion earthquakes," Civil Engineering Studies, Structural Research Series No. 434, University of Illinois, Urbana, Illinois.
6.Freeman S. A. [1978] \Prediction of response of concrete buildings to severe earthquake motion," ACI Special Publication SP-55, 589{605.
7.King, D. J., Priestley, M. J. N. and Park, R. [1986] \Computer programs for concrete column design," Res. Report 86/12, Department of Civil Engineering, University of Canterbury, New Zealand.
8.Paret, T. F, Sasaki, K. K., Eilbekc, D. H. and Freeman, S. A. [1996] \Approximate inelasticprocedures to identify failure mechanisms from higher mode eects," 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
9.Priestley, M. J. N. and Calvi, G. M. [1997] \Concepts and procedures for direct displacement- based design," Seismic Design Methodologies for the Next Generation of Codes, Fajfar and Krawinkler (eds.), Balkema, Rotterdam, pp. 171{181.
10.Priestley, M. J. N. and Kowalsky, M. J. [1998] \Aspects of drift and ductility capacity of cantilever structural walls," Bull. New Zealand Nat. Soc. Earthq. Engrg. 31(2).
11.Priestley, M. J. N. and Kowalsky, M. J. [2000] \Direct displacement-based design of concrete buildings," Bull. New Zealand Nat. Soc. Earthq. Engrg. 33(4).
13. Qi, X. and Moehle, J. P. [1991] \Displacement design approach for reinforced concrete structures subjected to earthquakes," Struct. Res. Series No. 413, Civ. Eng. Studies, University of Illinois, Urbana, Illinois.
14.Shimazaki, K. and Sozen, M. A. [1984] \Seismic drift of reinforced concrete structures,"Tech. Res. Rep. Of Hazama-Gumi, Tokyo, pp. 145{166.