03-01-2010, 10:14 AM
Dear Zbizafar,
1- Are you using, in the drawings created in your office, some referenced block? If yes, the block are in your server or in the same machine?
2- Have you tried to explode a test drawing and purge any external reference to see if the error persists?
3- Try to save as an old version (2000 or 14) and see if the error persists;
4- Try to save as r12 DXF a example file, open in another machine and test the copy/past to see if the problem persists.
5- Is your Video Card hardware acceleration activated? If yes, try to turn down/off.
Let us know the results of this tests.
Regards
Dell Brett
1- Are you using, in the drawings created in your office, some referenced block? If yes, the block are in your server or in the same machine?
2- Have you tried to explode a test drawing and purge any external reference to see if the error persists?
3- Try to save as an old version (2000 or 14) and see if the error persists;
4- Try to save as r12 DXF a example file, open in another machine and test the copy/past to see if the problem persists.
5- Is your Video Card hardware acceleration activated? If yes, try to turn down/off.
Let us know the results of this tests.
Regards
Dell Brett