03-07-2017, 09:58 AM
(This post was last modified: 03-07-2017, 09:59 AM by BennyP.
Edit Reason: N/A
)
Cadtools 2016-04-19 Build 713
CadTools (ToolBox) is developed for Civil Engineers using AutoCAD. There is a number of great software on the market that supports the design process for roads, rails etc. The final design of the drawing is often left for the user without any support other than AutoCAD’s usual tools and commands. In the beginning CadTools was designed to support slope calculation (drainage). Since the first version, over 50 useful commands have been added. Some commands have extra functionality limited for unregistered users.
Almost all commands are developed for 3D, the main reason for this is that it's fun to create design models in real 3D. Using Autocads Orbit command to examine the final design gives a good idea of how it's going to look when it's built.
CadTools provides several useful commands. The most common commands can be reached by a toolbar placed at the top.
The software runs in three modes, Slope , Command Tree and Tools. If mode is set to Tools all input-boxes and toolbars for drainage support are hidden.
• Decimal separator for input values in CadTools should be same as operating system settings (Control panel).
• All commands are developed for use in ModelSpace, some might even work in PaperSpace.
CadTools (ToolBox) is developed for Civil Engineers using AutoCAD. There is a number of great software on the market that supports the design process for roads, rails etc. The final design of the drawing is often left for the user without any support other than AutoCAD’s usual tools and commands. In the beginning CadTools was designed to support slope calculation (drainage). Since the first version, over 50 useful commands have been added. Some commands have extra functionality limited for unregistered users.
Almost all commands are developed for 3D, the main reason for this is that it's fun to create design models in real 3D. Using Autocads Orbit command to examine the final design gives a good idea of how it's going to look when it's built.
CadTools provides several useful commands. The most common commands can be reached by a toolbar placed at the top.
The software runs in three modes, Slope , Command Tree and Tools. If mode is set to Tools all input-boxes and toolbars for drainage support are hidden.
• Decimal separator for input values in CadTools should be same as operating system settings (Control panel).
• All commands are developed for use in ModelSpace, some might even work in PaperSpace.
1.Read the HELP and the Rules before posting.
2.Always post in the right thread.
3.Search before to prevent duplicates.
4.Use Preview Post to check.
5.THE BEST - Use the Post Generator.
6.Use the THANKS button.
7.Don't use REPLY if no need, use New Reply.
Chatting not allowed.
2.Always post in the right thread.
3.Search before to prevent duplicates.
4.Use Preview Post to check.
5.THE BEST - Use the Post Generator.
6.Use the THANKS button.
7.Don't use REPLY if no need, use New Reply.
Chatting not allowed.