10-27-2011, 01:01 PM
Volume 32, Issue 7, Pages 1791-1956 (July 2010)
Size: 40.5 MB | Format: PDF
Learning from Structural Failures
1.Editorial Board
Page IFC
2.Editorial
Page 1791
Jose M. Adam, Francisco J. Pallares
3.A study of the collapse of a WWII communications antenna using numerical simulations based on design of experiments by FEM
Pages 1792-1800
J.J. del Coz Díaz, P.J. García Nieto, A. Lozano Martínez-Luengas, J.L. Suárez Sierra
4.Evaluation study on structural fault of a Renaissance Italian palace
Pages 1801-1813
Michele Betti, Gianni Bartoli, Maurizio Orlando
5.Case study: Damage of an RC building after a landslide—inspection, analysis and retrofitting
Pages 1814-1820
P. Tiago, E. Júlio
6.Deep trench, landslide and effects on the foundations of a residential building: A case study
Pages 1821-1829
A. Brencich
7.Forensic diagnosis of a shield tunnel failure
Pages 1830-1837
Wei F. Lee, Kenji Ishihara
8.Failure of concrete T-beam and box-girder highway bridges subjected to cyclic loading from traffic
Pages 1838-1845
Kent K. Sasaki, Terry Paret, Juan C. Araiza, Peder Hals
9.Durability problem of RC structures in Tuzla industrial zone — Two case studies
Pages 1846-1860
Radomir Folić, Damir Zenunović
10.Transverse vibrations in existing railway bridges under resonant conditions: Single-track versus double-track configurations
Pages 1861-1875
M.D. Martínez-Rodrigo, J. Lavado, P. Museros
11.Case study: Analytical investigation on the failure of a two-story RC building damaged during the 2007 Pisco-Chincha earthquake
Pages 1876-1887
Oh-Sung Kwon, Eungsoo Kim
12.An evaluation of effective design parameters on earthquake performance of RC buildings using neural networks
Pages 1888-1898
M. Hakan Arslan
13.Structural performance of the historic and modern buildings of the University of L’Aquila during the seismic events of April 2009
Pages 1899-1924
A.M. Ceci, A. Contento, L. Fanale, D. Galeota, V. Gattulli, M. Lepidi, F. Potenza
14.Collapse modelling analysis of a precast soft storey building in Australia
Pages 1925-1936
Ari Wibowo, John L. Wilson, Nelson T.K. Lam, Emad F. Gad
15.Earthquake-induced poundings of a seismically isolated building with adjacent structures
Pages 1937-1951
Panayiotis C. Polycarpou, Petros Komodromos
16.Failure literacy in structural engineering
Pages 1952-1954
Norbert Delatte
Book Review
17.Book review
Page 1955
Jose M. Adam
18.Calendar
Pages I-II
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Volume 32, Issue 6, Pages 1495-1790 (June 2010)
Size: 33.8 MB | Format: PDF
1.Editorial Board
Page IFC
2.Integral abutment bridge response under thermal loading
Pages 1495-1508
WooSeok Kim, Jeffrey A. Laman
3.Strength and ductility of reinforced concrete slabs containing welded wire fabric and subjected to support settlement
Pages 1509-1521
R. Ian Gilbert, Zafer I. Sakka
4.Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathing
Pages 1522-1529
Cheng Yu
5.Code approaches to vortex shedding and own model
Pages 1530-1536
Andrzej Flaga, Tomasz Lipecki
6.Force transfer mechanism and shear strength of reinforced concrete beams
Pages 1537-1546
W.W. Kuo, T.J. Cheng, S.J. Hwang
7.Fragility analysis of steel moment frames with various seismic connections subjected to sudden loss of a column
Pages 1547-1555
Junhee Park, Jinkoo Kim
8.Limit and shakedown analysis of 3D steel frames via approximate ellipsoidal yield surfaces
Pages 1556-1567
M.-A.A. Skordeli, C.D. Bisbos
9.Criteria for uniqueness and extrema of moments in continuous end spans with differential settlement
Pages 1568-1576
W.M. Sebastian
10.The impact of the earthquake incident angle on the seismic loss estimation
Pages 1577-1589
Nikos D. Lagaros
11.Experimental investigation of the temperature effect on the structural response of SG-laminated reinforced glass beams
Pages 1590-1599
Christian Louter, Jan Belis, Freek Bos, Dieter Callewaert, Frederik Veer
12.Behaviour of combined channel/angle connections to tubular columns under monotonic and cyclic loading
Pages 1600-1616
C. Málaga-Chuquitaype, A.Y. Elghazouli
13.Non-linear analysis of two-layer timber beams considering interlayer slip and uplift
Pages 1617-1630
A. Kroflič, I. Planinc, M. Saje, G. Turk, B. Čas
14.Exact solution of the bending vibration problem of FGM beams with variation of material properties
Pages 1631-1640
J. Murín, M. Aminbaghai, V. Kutiš
15.Interaction diagrams for ambient and heated concrete sections
Pages 1641-1649
Angus Law, Martin Gillie
16.Shape and size optimisation of concrete shells
Pages 1650-1658
Antonio Tomás, Pascual Martí
17.Fatigue analysis of overhead sign support structures
Pages 1659-1670
Jennifer Kacin, Piervincenzo Rizzo, Mahdi Tajari
18.Analytical and numerical analysis of multilayered beams with interlayer slip
Pages 1671-1680
João Batista M. Sousa Jr, Amilton R. da Silva
19.Second-order analysis and design of imperfect composite beam–columns
Pages 1681-1690
M. Fong, Y.P. Liu, S.L. Chan
20.A new method for progressive collapse analysis of RC frames under blast loading
Pages 1691-1703
Yanchao Shi, Zhong-Xian Li, Hong Hao
21.Acoustic emission monitoring of bridges: Review and case studies
Pages 1704-1714
Archana Nair, C.S. Cai
22.Damage detection in instrumented structures without baseline modal parameters
Pages 1715-1722
Ramsés Rodríguez, J. Alberto Escobar, Roberto Gómez
23.Neural networks model and adaptive neuro-fuzzy inference system for predicting the moment capacity of ferrocement members
Pages 1723-1734
Mohammed A. Mashrei, Nabeel Abdulrazzaq, Turki Y. Abdalla, M.S. Rahman
24.Earthquake response of ten-story story-drift-controlled reinforced concrete frames with hysteretic dampers
Pages 1735-1746
Juan Andrés Oviedo A., Mitsumasa Midorikawa, Tetsuhiro Asari
25.Constructing input to neural networks for modeling temperature-caused modal variability: Mean temperatures, effective temperatures, and principal components of temperatures
Pages 1747-1759
H.F. Zhou, Y.Q. Ni, J.M. Ko
26.An algorithm for grouping members in a structure
Pages 1760-1768
Richard Walls, Alex Elvin
27.Effects of bolt–plate arrangements on steel plate strengthened reinforced concrete beams
Pages 1769-1778
R.K.L. Su, W.H. Siu, S.T. Smith
28.Truss vs solid modeling of tendons in prestressed concrete structures: Consequences on mechanical capacity of a Representative Structural Volume
Pages 1779-1790
Ludovic Jason, Shahrokh Ghavamian, Alexis Courtois
29.Calendar
Pages I-II
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Volume 32, Issue 5, Pages 1199-1494 (May 2010)
Size: 38.5 MB | Format: PDF
1.Editorial Board
Page IFC
2.An efficient mathematical programming method for the elastoplastic analysis of frames
Pages 1199-1214
Konstantinos V. Spiliopoulos, Theodoros N. Patsios
3.Full-scale field trials to assess dry-stone retaining wall stability
Pages 1215-1222
Anne-Sophie Colas, Jean-Claude Morel, Denis Garnier
4.Nonlinear dynamic simulations of progressive collapse for a multistory building
Pages 1223-1235
Leslaw Kwasniewski
5.Numerical and experimental investigation of the behavior of high strength concrete columns in fire
Pages 1236-1243
Faris Ali, Ali Nadjai, S. Choi
6.Micromodelling of eccentrically loaded brickwork: Study of masonry wallettes
Pages 1244-1251
Jose M. Adam, Antonio Brencich, Tim G. Hughes, Tony Jefferson
7.Integrated wind load analysis and stiffness optimization of tall buildings with 3D modes
Pages 1252-1261
C.M. Chan, M.F. Huang, K.C.S. Kwok
8.Strength, cracking and deflection performance of large-scale self-consolidating concrete beams subjected to shear failure
Pages 1262-1271
A.A.A. Hassan, K.M.A. Hossain, M. Lachemi
9.A modified approach of energy balance concept based multimode pushover analysis to estimate seismic demands for buildings
Pages 1272-1283
Yi Jiang, Gang Li, Dixiong Yang
10.Reliability of steel frames designed in accordance with the National Building Code of Canada seismic provisions and its implication in codified design
Pages 1284-1291
H.P. Hong, P. Hong, W. Wang
11.Performance assessment of precast concrete segmental bridge columns with a shear resistant connecting structure
Pages 1292-1303
T.-H. Kim, H.-M. Lee, Y.-J. Kim, H.M. Shin
12.Collapse mechanisms at the foundation interface of geometrically similar concrete gravity dams
Pages 1304-1311
Gabriella Bolzon
13.A methodology for deriving analytical fragility curves for masonry buildings based on stochastic nonlinear analyses
Pages 1312-1323
M. Rota, A. Penna, G. Magenes
14.Experimental validation of free vibrations from nonsymmetrical thin walled beams
Pages 1324-1332
Daniel Ambrosini
15.Influence of variations in geometric parameters and an alternative design for improved fatigue life of a mining dragline joint
Pages 1333-1340
Suraj Joshi, John W.H. Price, Daya P. Dayawansa
16.Ultimate strength analysis of normal and high strength concrete wall panels with varying opening configurations
Pages 1341-1355
Hong Guan, Carlia Cooper, Dong-Jun Lee
17.Stress and acceleration analysis of coupled vehicle and long-span bridge systems using the mode superposition method
Pages 1356-1368
Y.L. Xu, Q. Li, D.J. Wu, Z.W. Chen
18.Determination of impact factor for steel railway bridges considering simultaneous effects of vehicle speed and axle distance to span length ratio
Pages 1369-1376
Sajad Ahmad Hamidi, Farhad Danshjoo
19.Dynamic analysis of concrete arch dams by ideal-coupled modal approach
Pages 1377-1383
Ahmad Aftabi Sani, Vahid Lotfi
20.A geometric nonlinear model for composite beams with partial interaction
Pages 1384-1396
Gianluca Ranzi, Andrea Dall’Asta, Laura Ragni, Alessandro Zona
21.Web crippling of aluminium tubes with perforated webs
Pages 1397-1410
Feng Zhou, Ben Young
22.Numerical modelling of cracks in masonry walls due to thermal movements in an overlying slab
Pages 1411-1422
K.G.S. Dilrukshi, W.P.S. Dias, R.K.N.D. Rajapakse
23.A simplified approach for evaluating plastic axial and moment capacity curves for beam–columns with non-uniform thermal gradients
Pages 1423-1436
Mahmud Dwaikat, Venkatesh Kodur
24.Inverse identification of creep of concrete from in situ load–displacement monitoring
Pages 1437-1445
Sungmoon Jung, Jamshid Ghaboussi
25.Reliability-based optimal design of linear dynamical systems under stochastic stationary excitation and model uncertainty
Pages 1446-1458
Alexandros A. Taflanidis
26.Generic modelling of composite steel–concrete slabs subjected to shrinkage, creep and thermal strains including partial interaction
Pages 1459-1465
Mark A. Bradford
27.Numerical models for the seismic assessment of an old masonry tower
Pages 1466-1478
Fernando Peña, Paulo B. Lourenço, Nuno Mendes, Daniel V. Oliveira
28.Component mode synthesis combining robust enriched Ritz approach for viscoelastically damped structures
Pages 1479-1488
A.M.G. de Lima, A.R. da Silva, D.A. Rade, N. Bouhaddi
29.Optimization of RC structure performance in marine environment
Pages 1489-1494
Rui Miguel Ferreira
30.Calendar
Pages I-II
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Volume 32, Issue 4, Pages 911-1198 (April 2010)
Size: 60.3 MB | Format: PDF
1.Editorial Board
Page IFC
2.The vulnerability of residential window glass to lightweight windborne debris
Pages 911-921
Forrest J. Masters, Kurtis R. Gurley, Nirav Shah, George Fernandez
3.Strength prediction of squat structural walls via calibration of a shear–flexure interaction model
Pages 922-932
4.Leonardo M. Massone4.Modelling the response of cyclically loaded bridge columns embedded in warm and seasonally frozen soils
Pages 933-943
L.M. Wotherspoon, S. Sritharan, M.J. Pender
5.Nonlinear behavior of code-designed reinforced concrete concentric braced frames under lateral loading
Pages 944-963
Eber Alberto Godínez-Domínguez, Arturo Tena-Colunga
6.Seismic strengthening of rectangular reinforced concrete columns using fiber reinforced polymers
Pages 964-973
Okan Ozcan, Baris Binici, Guney Ozcebe
7.Application of lumped dissipation model in nonlinear analysis of reinforced concrete structures
Pages 974-981
Gerson Moacyr Sisniegas Alva, Ana Lúcia Homce de Cresce El Debs
8.Distortional buckling of overhanging monorails
Pages 982-987
N.S. Trahair
9.Nonlinear reinforced concrete frame element with torsion
Pages 988-1002
Hamid R. Valipour, Stephen J. Foster
10.Experimental and analytical studies on the stability of structural steel tube and coupler scaffolds without X-bracing
Pages 1003-1015
Hongbo Liu, Qiuhong Zhao, Xiaodun Wang, Ting Zhou, Dong Wang, Jie Liu, Zhihua Chen
11.Moving force identification based on stochastic finite element model
Pages 1016-1027
S.Q. Wu, S.S. Law
12.Built-up hybrid composite box girders fabricated and tested in flexure
Pages 1028-1037
Amir Fam, Hart Honickman
13.Time-dependent analyses of segmentally constructed balanced cantilever bridges
Pages 1038-1045
Richard Malm, Håkan Sundquist
14.A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression
Pages 1046-1053
Min Yu, Xiaoxiong Zha, Jianqiao Ye, Chunyan She
15.Fully integrated design and analysis of Tensioned Fabric Structures: Finite elements and case studies
Pages 1054-1068
J.B. Pargana, D. Lloyd-Smith, B.A. Izzuddin
16.Studies for controlling human-induced vibration of the Pedro e Inês footbridge, Portugal. Part 1: Assessment of dynamic behaviour
Pages 1069-1081
Elsa Caetano, Álvaro Cunha, Filipe Magalhães, Carlos Moutinho
17.Studies for controlling human-induced vibration of the Pedro e Inês footbridge, Portugal. Part 2: Implementation of tuned mass dampers
Pages 1082-1091
Elsa Caetano, Álvaro Cunha, Carlos Moutinho, Filipe Magalhães
18.Plastic optimization of 3D steel frames under fixed or repeated loading: Reduction formulation
Pages 1092-1099
Hoang Van Long, Nguyen Dang Hung
19.An unconventional restraining system for limiting the seismic movements of isolated bridges
Pages 1100-1112
Stergios A. Mitoulis, Ioannis A. Tegos
20.A brace-type seismic damper based on yielding the walls of hollow structural sections
Pages 1113-1122
Amadeo Benavent-Climent
21.An innovative passive control technique for industrial precast frames
Pages 1123-1132
Paolo Martinelli, Maria Gabriella Mulas
22.Resistance of the component ‘lateral faces of RHS’ at high temperature
Pages 1133-1139
Carlos López-Colina, Miguel A. Serrano-López, Fernando L. Gayarre, Francisco J. Suárez
23.The effect of fatigue on the arrangement of hangers in tied arch bridges
Pages 1140-1147
Carlo Pellegrino, Giovanni Cupani, Claudio Modena
24.Thermo-mechanical analysis of the fire performance of dowelled timber connection
Pages 1148-1157
P. Racher, K. Laplanche, D. Dhima, A. Bouchaïr
25.Designing tensegrity modules for pedestrian bridges
Pages 1158-1167
Landolf Rhode-Barbarigos, Nizar Bel Hadj Ali, René Motro, Ian F.C. Smith
26.An innovative isolation device for aseismic design
Pages 1168-1183
M. Ismail, J. Rodellar, F. Ikhouane
27.Design model for the verification of the separating function of light timber frame assemblies
Pages 1184-1195
Andrea Frangi, Vanessa Schleifer, Mario Fontana
Book Review
28.Book review
Page 1196
Tibor Tarnai
Corrigendum
29.Corrigendum to: “Evaluation of peak resultant response for wind-excited tall buildings” [Eng Struct 31 (2009) 858–868]
Page 1197
Xinzhong Chen, Guoqing Huang
30.Calendar
Pages I-II
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Volume 32, Issue 3, Pages 617-910 (March 2010)
Size: 70.5 MB | Format: PDF
1.Editorial Board
Page IFC
2.Shear strength of heavily reinforced concrete members with circular cross section
Pages 617-626
Uffe G. Jensen, Linh C. Hoang, Henrik B. Joergensen, Lars S. Fabrin
3.Optimization of bridge maintenance strategies based on multiple limit states and monitoring
Pages 627-640
André D. Orcesi, Dan M. Frangopol, Sunyong Kim
4.The influence of different safety formats proposed by Eurocode 2 on the deformability and design of slender structural elements
Pages 641-647
João Santos, João Vinagre
5.Behavior of concrete prisms confined with FRP composites under axial cyclic compression
Pages 648-655
R. Abbasnia, H. Ziaadiny
6.Experimental investigation of actively confined concrete using shape memory alloys
Pages 656-664
Moochul Shin, Bassem Andrawes
7.Finite element modeling of confined concrete-I: Drucker–Prager type plasticity model
Pages 665-679
T. Yu, J.G. Teng, Y.L. Wong, S.L. Dong
8.Finite element modeling of confined concrete-II: Plastic-damage model
Pages 680-691
T. Yu, J.G. Teng, Y.L. Wong, S.L. Dong
9.CFDST stub columns subjected to large deformation axial loading
Pages 692-703
Xiao-Ling Zhao, Le-Wei Tong, Xing-Yi Wang
10.Imperfection analysis of austenitic stainless steel plate girders failing by shear
Pages 704-713
M.F. Hassanein
11.Effectiveness of adding confinement for ductility improvement of high-strength concrete columns
Pages 714-725
J.C.M. Ho, J.Y.K. Lam, A.K.H. Kwan
12.Performance enhancement of R/C building columns and beam–column joints through shotcrete jacketing
Pages 726-740
Alexander-Dimitrios G. Tsonos
13.Warping shear stresses in nonlinear nonuniform torsional vibrations of bars by BEM
Pages 741-752
E.J. Sapountzakis, V.J. Tsipiras
14.Coupled experimental and numerical investigation of structural glass panels with small slenderness subjected to locally introduced axial compression
Pages 753-761
Danijel Mocibob, Jan Belis
15.Application of symbolic data analysis for structural modification assessment
Pages 762-775
Alexandre Cury, Christian Crémona, Edwin Diday
16.Experimental tests and numerical modeling of reinforced masonry arches
Pages 776-792
Ilaria Cancelliere, Maura Imbimbo, Elio Sacco
17.Exact reliability calculation with quadratic failure indices in random vibration
Pages 793-799
Enrique de la Fuente, Miguel A. Sanz, José L. Hernando
18.Fatigue assessment of welded trapezoidal joints of a very fast ferry subjected to combined load
Pages 800-807
Y. Garbatov, S. Rudan, C. Guedes Soares
19.Dynamic performance of existing high-speed railway bridges under resonant conditions retrofitted with fluid viscous dampers
Pages 808-828
M.D. Martínez-Rodrigo, J. Lavado, P. Museros
20.Long-term deflections in cracked reinforced concrete flexural members
Pages 829-842
Antonio R. Marí, Jesús M. Bairán, Noemi Duarte
21.A numerical model based on nonconvex–nonsmooth optimization for the simulation of bending tests on composite slabs with profiled steel sheeting
Pages 843-853
K.A. Tzaros, E.S. Mistakidis, P.C. Perdikaris
22.Monitoring and enhanced fatigue evaluation of a steel railway bridge
Pages 854-863
John Leander, Andreas Andersson, Raid Karoumi
23.An improved ant colony optimization for the design of planar steel frames
Pages 864-873
A. Kaveh, S. Talatahari
24.Structural assessment of corroded self-consolidating concrete beams
Pages 874-885
A.A.A. Hassan, K.M.A. Hossain, M. Lachemi
25.Impulsive loading events and similarity scaling
Pages 886-896
I.M. Snyman
26.On shear bond strength of FRP-concrete structures
Pages 897-905
Yefei Wu, Zhiqiang Zhou, Qingda Yang, Weiqiu Chen
Short Communication
27.An elementary derivation of basic equations of the Reissner and Mindlin plate theories
Pages 906-909
Milan Batista
28.Calendar
Pages I-II
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************