09-26-2010, 12:16 PM
(This post was last modified: 09-26-2010, 12:30 PM by RANA WASEEM.)
dear ynopum,
#1-i have noted your precious pieces of advice for my next coming "SERIOUS" softwares to not include "fance fonts" type things.
#2-my company is an international consultancy company with 3 international branches and we are currently working on a 400m high rise tower. So your supposition about my company drafting standards is not true.
#3-the drawing nos. iv mentioned in my post are just for an example. and donot reflect the standard used in our company.
#4-if you have better program than this one, its perfectly alright, you should not use my software, the main reason for sharing was to attract some visual basic programmer like me and to improve the application and to share this apps for the like minded people.
#5-it was not a wastage of time for me and neither it was to repair the "mistake of management". it was just an effort to save time cz being a structural engineer you dont have to waste time on printing. but at that specific time if had not developed it, it would have taken my 2 whole days instead of (2 HOURS) bcz all drafts men were too busy near submission date.
#6-finally as i mentined...this software has other apps too...for example to arrange 1000s of pdfs etc.
#7-my this sheet was i think very useful and popular for forum mebers which i uploaded for forum members...because using design excel sheet sometimes need changes in formula so i did some coding and made an effort to save time for users...IF YOU WANT TO DO ALL THESE STUFF MANUALLY, ITS UPTO YOU, IM NOT ORDERING TO DO SO...
addition
DWG REV TITLE
S20B3 2 ORIENTATION PLAN SUBGRADE LEVEL B3 GA
S20B3A 2 SUBGRADE LEVEL B3 GA PLAN (AREA A)
S20B3B 1 SUBGRADE LEVEL B3 GA PLAN (AREA B)
S21B3 2 ORIENTATION PLAN SUB GRADE LEVEL B3 RC
S21B3A 2 SUBGRADE LEVEL B3 RC PLAN (AREA A)
S21B3B 0 SUBGRADE LEVEL B3 RC PLAN (AREA B)
S20B2 4 ORIENTATION PLAN SUBGRADE LEVEL B2 GA
S20B2A 2 SUBGRADE LEVEL B2 GA PLAN (AREA A)
S20B2B 3 SUBGRADE LEVEL B2 GA PLAN (AREA B)
S21B2 4 ORIENTATION PLAN SUBGRADE LEVEL B2 RC
S21B2A 2 SUBGRADE LEVEL B2 RC PLAN (AREA A)
S21B2B 1 SUBGRADE LEVEL B2 RC PLAN (AREA B)
you can see
S = structures
2 = plans
0 for GA plan and 1 for RC plan
B3, B2, L1, etc for levels
A,B etc for areas (for bigger projects)
so if you want first GA plans and then RC plans so your sheets should be in this arrangement:-
and suppose you have B3 (basement 3) and then going up have B2
S20B3
S21B3
then
S20B2
S21B2
how you will arrange this in folder?
#1-i have noted your precious pieces of advice for my next coming "SERIOUS" softwares to not include "fance fonts" type things.
#2-my company is an international consultancy company with 3 international branches and we are currently working on a 400m high rise tower. So your supposition about my company drafting standards is not true.
#3-the drawing nos. iv mentioned in my post are just for an example. and donot reflect the standard used in our company.
#4-if you have better program than this one, its perfectly alright, you should not use my software, the main reason for sharing was to attract some visual basic programmer like me and to improve the application and to share this apps for the like minded people.
#5-it was not a wastage of time for me and neither it was to repair the "mistake of management". it was just an effort to save time cz being a structural engineer you dont have to waste time on printing. but at that specific time if had not developed it, it would have taken my 2 whole days instead of (2 HOURS) bcz all drafts men were too busy near submission date.
#6-finally as i mentined...this software has other apps too...for example to arrange 1000s of pdfs etc.
#7-my this sheet was i think very useful and popular for forum mebers which i uploaded for forum members...because using design excel sheet sometimes need changes in formula so i did some coding and made an effort to save time for users...IF YOU WANT TO DO ALL THESE STUFF MANUALLY, ITS UPTO YOU, IM NOT ORDERING TO DO SO...
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
addition
DWG REV TITLE
S20B3 2 ORIENTATION PLAN SUBGRADE LEVEL B3 GA
S20B3A 2 SUBGRADE LEVEL B3 GA PLAN (AREA A)
S20B3B 1 SUBGRADE LEVEL B3 GA PLAN (AREA B)
S21B3 2 ORIENTATION PLAN SUB GRADE LEVEL B3 RC
S21B3A 2 SUBGRADE LEVEL B3 RC PLAN (AREA A)
S21B3B 0 SUBGRADE LEVEL B3 RC PLAN (AREA B)
S20B2 4 ORIENTATION PLAN SUBGRADE LEVEL B2 GA
S20B2A 2 SUBGRADE LEVEL B2 GA PLAN (AREA A)
S20B2B 3 SUBGRADE LEVEL B2 GA PLAN (AREA B)
S21B2 4 ORIENTATION PLAN SUBGRADE LEVEL B2 RC
S21B2A 2 SUBGRADE LEVEL B2 RC PLAN (AREA A)
S21B2B 1 SUBGRADE LEVEL B2 RC PLAN (AREA B)
you can see
S = structures
2 = plans
0 for GA plan and 1 for RC plan
B3, B2, L1, etc for levels
A,B etc for areas (for bigger projects)
so if you want first GA plans and then RC plans so your sheets should be in this arrangement:-
and suppose you have B3 (basement 3) and then going up have B2
S20B3
S21B3
then
S20B2
S21B2
how you will arrange this in folder?
WS