Dear Imran,
Are you a new user in ETABS ?
After seeing your pictures attach and your reply comment above, I think you not familiar with ETABS.
DCON1, DCON2,... they are the default load combination on ETABS for concrete analysis.
You can make your own..like COMB 1 = 1.4 DL, COMB 2 = 1.2 DL + 1.6 LL, etc..
You should make the right model in ETABS include the Load Combination, and then you run your model.
After that you can click or select elements (Beam, Column) that wat you want to control, click FILE - Print Tables - Analysis Output - Check "FRAME FORCES" only - Click "SELECT LOADS" button - Choose all Combination - Check "PRINT TO FILE" and "ENVELOPES ONLY" - make your own name for the txt file - Click OK.
Click FILE - Display Input/Output - double click the txt. Now you can see the MAXIMUM and MINIMUM value that happened on beam or column that you had selected.
FYI : ETABS cannot show all Critical forces (Moment, Shear, etc) in one table/windows on grapichal view together. But in other software like SPACEGASS, can do it.
regards,
robertsasmita
Are you a new user in ETABS ?
After seeing your pictures attach and your reply comment above, I think you not familiar with ETABS.
DCON1, DCON2,... they are the default load combination on ETABS for concrete analysis.
You can make your own..like COMB 1 = 1.4 DL, COMB 2 = 1.2 DL + 1.6 LL, etc..
You should make the right model in ETABS include the Load Combination, and then you run your model.
After that you can click or select elements (Beam, Column) that wat you want to control, click FILE - Print Tables - Analysis Output - Check "FRAME FORCES" only - Click "SELECT LOADS" button - Choose all Combination - Check "PRINT TO FILE" and "ENVELOPES ONLY" - make your own name for the txt file - Click OK.
Click FILE - Display Input/Output - double click the txt. Now you can see the MAXIMUM and MINIMUM value that happened on beam or column that you had selected.
FYI : ETABS cannot show all Critical forces (Moment, Shear, etc) in one table/windows on grapichal view together. But in other software like SPACEGASS, can do it.
regards,
robertsasmita