09-21-2010, 08:19 PM
probable causes
- designed as simply supported.
- cables not strong enough obviously.
- reinforcement not sufficient
- rebar detailing improper
- sequential construction not considered during design.
- low strength concrete or improper curing
also, no fail safe in case cables snaps
-no ballast at the end slabs
-slabs disconnected with supports (simply supported)
- designed as simply supported.
- cables not strong enough obviously.
- reinforcement not sufficient
- rebar detailing improper
- sequential construction not considered during design.
- low strength concrete or improper curing
also, no fail safe in case cables snaps
-no ballast at the end slabs
-slabs disconnected with supports (simply supported)
Stability is the best policy.