The Finite Element Method Its Basis and Fundamentals
Author: O.C. Zienkiewicz, R.L. Taylor and J.Z. Zhu | Size: 8.988 MB | Format: PDF | Publisher: Elsevier Butterworth-Heinemann | Year: 2005 | pages: 792 | ISBN: 075066320 0
It is thirty-eight years since the The Finite Element Method in Structural and Continuum Mechanics was first published. This book, which was the first dealing with the finite element method, provided the basis from which many further developments occurred. The expanding research and field of application of finite elements led to the second edition in 1971, the third in 1977, the fourth as two volumes in 1989 and 1991 and the fifth as three volumes in 2000. The size of each of these editions expanded geometrically (from 272 pages in 1967 to the fifth edition of 1482 pages). This was necessary to do justice to a rapidly expanding field of professional application and research. Even so, much filtering of the contents was necessary to keep these editions within reasonable bounds.
In the present edition we have decided not to pursue the course of having three contiguous volumes but rather we treat the whole work as an assembly of three separate works, each one capable of being used without the others and each one appealing perhaps to a different audience. Though naturally we recommend the use of the whole ensemble to people wishing to devote much of their time and study to the finite element method.
In particular the first volume which was entitled The Finite Element Method: The Basis is now renamed The Finite Element Method: Its Basis and Fundamentals. This volume has been considerably reorganized from the previous one and is now, we believe, better suited for teaching fundamentals of the finite element method. The sequence of chapters has been somewhat altered and several examples of worked problems have been added to the text. A set of problems to be worked out by students has also been provided.
In addition to its previous content this book has been considerably enlarged by including more emphasis on use of higher order shape functions in formulation of problems and a new chapter devoted to the subject of automatic mesh generation. A beginner in the finite element field will find very rapidly that much of the work of solving problems consists of preparing a suitable mesh to deal with the whole problem and as the size of computers has seemed to increase without limits the size of problems capable of being dealt with is also increasing. Thus, meshes containing sometimes more than several million nodes have to be prepared with details of the material interfaces, boundaries and loads being well specified.
There are many books devoted exclusively to the subject of mesh generation but we feel that the essence of dealing with this difficult problem should be included here for those who wish to have a complete ‘encyclopedic’ knowledge of the subject.
DIRECT LINKS
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************