Steel Bridge Bearing Design and Detailing Guidelines

Milkshake · (This post was last modified: 12-16-2011, 06:14 PM by usman.)

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

__________________________________________________________________

Post edited. Link is working but password is required
New links are given in Post No. 4
__________________________________________________________________

**oanm2000** · (This post was last modified: 08-24-2009, 08:29 PM by oanm2000.)

Steel Bridge Bearing Design and Detailing Guidelines

info:

This document is a standard developed by the AASHTO/ NSBA Steel Bridge Collaboration. The primary goal of the Collaboration is to achieve steel bridges of the highest quality and value through standardization of the design, fabrication, and erection processes. Each standard represents the consensus of a diverse group of professionals.
As consensus documents, the Collaboration standards represent the best available current approach to the processes they cover. It is intended that Owners adopt and implement Collaboration standards in their entirety to facilitate the achievement of standardization, but it is understood that local statutes or preferences may prevent full adoption of the document. In such cases, Owners should adopt these documents with the exceptions they feel are necessary.
The following guidelines and details are for typical steel bridges. The Collaboration recognizes that most states currently have standards for bearings, however it is the intent that states will adopt or modify their standards for steel bridge bearings to conform to this guideline. In many cases, options for economical bearings are offered to facilitate the acceptance and use of this document.

Download Links:

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

ir_71 · 01-03-2011, 05:50 AM

Steel Bridge Bearing Design and Detailing Guidelines

This document is a standard developed by the AASHTO/ NSBA Steel Bridge Collaboration. The primary goal of the Collaboration is to achieve steel bridges of the highest quality and value through standardization of the design, fabrication, and erection processes. Each standard represents the consensus of a diverse group of professionals.
As consensus documents, the Collaboration standards represent the best available current approach to the processes they cover. It is intended that Owners adopt and implement Collaboration standards in their entirety to facilitate the achievement of standardization, but it is understood that local statutes or preferences may prevent full adoption of the document. In such cases, Owners should adopt these documents with the exceptions they feel are necessary.
The following guidelines and details are for typical steel bridges. The Collaboration recognizes that most states currently have standards for bearings, however it is the intent that states will adopt or modify their standards for steel bridge bearings to conform to this guideline. In many cases, options for economical bearings are offered to facilitate the acceptance and use of this document.

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

Made By CivilEA Post-Generator ver 2.0

mowafi3m · 01-14-2011, 09:05 PM

Mirror

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

melkat · (This post was last modified: 12-16-2011, 08:06 PM by usman.)

New Link

Steel Bridge Bearing Design And Detailing Guidelines

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

kvtasp · 02-07-2012, 04:12 AM

Code:
Content of this section is hidden, You must be registered and upgrade your account to see this content.

🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

This post has been made by CivilEA Post-Generator ver 2.1.6

arshiakh · 03-02-2013, 10:07 AM

[MIRROR]Content of this section is hidden, You must be registered and upgrade your account to see this content.
[/MIRROR] 🔽🔽🔽🔽🔽🔽🔽🔽🔽
See this link to read how you can remove this limitation:
👉 CLICK HERE 👈

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	CIRIA C543 - Bridge Detailing Guide	rami1976	0	2,016	11-04-2017, 08:15 PM Last Post: rami1976
	Design and Construction Guidelines for Geosynthetic-Reinforced Soil Bridge Abutments	mahyarov	2	2,610	10-22-2015, 02:24 PM Last Post: PinkPant
	DESIGN OF LEAD RUBBER BEARING	rami1976	0	1,648	10-11-2015, 12:02 PM Last Post: rami1976
	FHWA-IF-12-052 Steel Bridge Design Handbook	bigone	0	2,098	09-01-2013, 10:03 AM Last Post: bigone
	AISI Steel Bridge Bearing Selection and Design Guide	triance	2	4,024	03-12-2013, 06:55 PM Last Post: ssobhan
	Guidelines for Inspection and Strength Evaluation of Suspension Bridge Parallel Wi	mahyarov	0	1,568	10-24-2012, 07:10 AM Last Post: mahyarov
	GUIDELINES FOR BRIDGE DESIGN	Albert	2	3,425	07-14-2012, 06:52 AM Last Post: shadabg