Civil Engineering Association

Pages: 1 2

Seismic Design Manual (SEAOC)
Vol 1 : Code Application Examples

The various code application examples of Volume I are organized in numerical order by 1997 UBC section number. To find an example for a particular provision of the code, look at the upper, outer corner of each page, or in the table of contents.

Volume I of the SEAOC Seismic Design Manual: Code Application Examples deals with interpretation and use of the seismic provisions of the 1997 Uniform Building Code (UBC). The Seismic Design Manual is intended to help the reader understand and correctly use the UBC seismic provisions and to provide clear, concise, and graphic guidance on the application of specific provisions of the code. It primaril addresses the major seismic provisions of Chapter 16 of the UBC, with interpretation of specific provisions and examples highlighting their proper application. Volume I presents 55 examples that illustrate the application of specific seismic provisions of the UBC. Each example is a separate problem, or group of problems, and deals primarily with a single code provision. Each example begins with a description of the problem to be solved and a statement of given information. The problem is solved through the normal sequence of steps, each of which are illustrated in full. Appropriate code references for each step are identified in the right-hand margin of the page.

[Image: Download.png]

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Seismic Design Manual (SEAOC)
Vol2 : Building Design Examples

This document is the second volume of the three-volume SEAOC Seismic Design Manual. The first volume, “Code Application Examples,” was published in April 1999. These documents have been developed by the Structural Engineers Association of California (SEAOC) with funding provided by SEAOC. Their purpose is to provide guidance on the interpretation and use of the seismic requirements in the 1997 Uniform Building Code (UBC), published by the International Conference of Building Officials (ICBO), and SEAOC’s 1999 Recommended Lateral Force Requirements and Commentary (also called the Blue Book).

Volume II contains six examples. These illustrate the seismic design of the following structures: (1) a two-story wood light frame residence, (2) a three-story wood light frame building, (3) a three-story cold formed light frame building, (4) a one-story masonry building with panelized wood roof, (5) a one-story tilt-up building with panelized wood roof, and (6) the design of a tilt-up wall panel with large openings.

[Image: Download.png]

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Seismic Design Manual (SEAOC)
Vol 3 : Building Design Examples

This document is the third volume of the three-volume SEAOC Seismic Design Manual. The first volume, Code Application Examples, was published in April 1999. The second volume, Building Design Examples: Light Frame, Masonry and Tilt-up was published in April 2000. These documents have been developed by the Structural Engineers

Volume III contains ten examples. These illustrate the seismic design of the following structures:
1. Three steel braced frames (special, ordinary, and chevron)
2. Eccentric braced frame
3. Two steel moment-resisting frames (special and ordinary)
4. Concrete shear wall
5. Concrete shear wall with coupling beams
6. Concrete special moment-resisting frame
7. Precast concrete cladding

[Image: Download.png]

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Mirror Links Vol 1 : Code Application Examples :

Bookmark PDF|RAR 1.66|0.83 MB

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Mirror Links Vol2 : Building Design Examples :

Bookmark PDF|RAR 3.65|3.32 MB

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Mirror Links Vol 3 : Building Design Examples:

Bookmark PDF|RAR 2.96|2.55 MB

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Seismic Design Manual - Volume III

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Please if anyone have the newest version share to us.
SEAOC Updates and Errata:

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

SEAOC: Seismic Design Manuals
Vols. 1, 2, 3 in one winrar file

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

SEAOC Seismic Design Manual Vol. 01, Code Application Examples_1999.pdf (7.7 MB)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

SEAOC Seismic Design Manual Vol. 02, Building Design Examples Light Frame, Masonry and Tilt Up_2000.pdf (3.5 MB)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

SEAOC Seismic Design Manual Vol. 03, Building Design Examples Steel, Concrete and Cladding_2000.pdf (2.8 MB)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Pages: 1 2

robertsas

robertsas

robertsas

kowheng

kowheng

kowheng

shadabg

david-smith

gulilero

bigone