Civil Engineering Association

PD CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials. Guidelines on implementing ISO 3834

PD CEN ISO/TR 3834-6:2007 gives guidelines for the implementation of requirements given in the other parts of BS EN ISO 3834, and is intended to help manufacturers and users select the part of BS EN ISO 3834 appropriate to their needs. It is expected that they will already be familiar with BS EN ISO 3834 series as a whole.

Welding is a special process in that the final result may not be able to be verified by testing. The quality of the weld is manufactured into the product, not inspected. This means that welding normally requires continuous control or that specific procedures be followed, or both. BS EN ISO 3834 deals with quality requirements in welding and has been prepared in order to identify those controls and procedures.

BS EN ISO 3834 is not a quality system standard intended to take the place of ISO 9001, but a useful, additional tool for use when ISO 9001 is applied by manufacturers, in which case the meeting of its requirements needs to be recorded in certificates or documentation. However, BS EN ISO 3834 can be used independently of ISO 9001.

BS EN ISO 3834 is intended for the fusion welding of metallic materials, and its application is independent of the products manufactured. However, its principles and many of its detailed requirements are also relevant for other welding and welding-related processes.

Among other international standards covering resistance welding and thermal spraying are BS EN ISO 14554 and BS EN ISO 14922, respectively.

One of the aims of BS EN ISO 3834 is to define requirements in the field of welding so that contracting parties or regulators do not have to do it themselves. A reference to a particular part of BS EN ISO 3834 should be sufficient to demonstrate the capabilities of the manufacturer to control welding activities for the type of work being done. This concept also applies to committees responsible for drafting product standards.

BS EN ISO 3834 does not in itself require external assessment or certification. However, assessments by customers and certification by independent bodies are growing trends in commercial relations and the standard can serve as a basis for these purposes, as well as for the demonstration of performance by those manufacturers implementing it.
Contents include:

Normative references
Abbreviated terms
Using ISO 3834
Product standards
Purchasers and users
Quality management systems in accordance with ISO 9001
Quality management systems other than ISO 9001
Manufacturers
Incorporating ISO 3834 in product standards
Using other documents with ISO 3834
Documentation and quality systems
Selecting the level of quality requirements
Implementation in fabrication
General guidelines for implementation
Organization
Interpretation of particular clauses in ISO 3834
Requirements review and technical review
Sub-contracting
Welding coordination
Equipment
Welding activities
Storage of parent metal
Calibration and validation
Identification and traceability
Assessment and certification
Examples of documents for control of welding
Bibliography

PD CEN ISO/TR 3834-6:2007 replaces PD CR 13576:1999, which has been withdrawn

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

BS EN ISO 3834-5:2005: Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4

This part of ISO 3834 specifies the documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4. It can only be used in conjunction with ISO 3834-2, ISO 3834-3 or ISO 3834-4.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

BS EN ISO 3834-4:2005: Quality requirements for fusion welding of metallic materials —Part 4: Elementary quality requirements

This part of ISO 3834 defines elementary quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

BS EN ISO 3834-2:2005: Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements

This part of ISO 3834 defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

BS EN ISO 3834-3:2005: Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements

This part of ISO 3834 defines standard quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

BS EN ISO 3834-1:2005: Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements

This part of ISO 3834 provides a general outline of ISO 3834 and criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials, among the three levels specified in ISO 3834-2, ISO 3834-3 and ISO 3834-4. It applies to manufacturing, both in workshops and at field installation sites.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

new link

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

password:

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

mybest

Mohammad6299

Mohammad6299

Mohammad6299

Mohammad6299

Mohammad6299

Mohammad6299

andersen3