Civil Engineering Association

ACI 332-10 Residential Code Requirements for Structural Concrete (ACI 332-10) and Commentary

The “Residential Code Requirements for Structural Concrete” cover the design and construction of cast-in-place concrete for one- and two-family dwellings and multiple single-family dwellings (townhouses), and their accessory structures.

Among the subjects covered are the design and construction requirements for plain and reinforced concrete footings, foundation walls, and slabs-on-ground, and requirements for concrete, reinforcement, forms, and other related materials.

The quality and testing of materials discussed in this document are covered by reference to the appropriate ASTM standards.

The Code is written to allow for reference by adoption in a general building code without changing its language. Background details or suggestions for carrying out the requirements or intent of the Code are provided in the commentary. The commentary discusses some of the considerations of the committee in developing the Code with emphasis given to the explanation of provisions that may be unfamiliar to code users or where significant departure exists from other concrete codes. Commentary provisions begin with an “R,” such as “R.1.1.1,” and commentary text is shown in italics.

Relevant resource documents are cited for the user desiring more detailed study of individual issues.

Keywords: admixtures; aggregates; air entrainment; anchorage (structural); backfill; building codes; calcium chloride; cements; cold weather construction; compressive strength; concrete construction; concrete construction joints; concretes; contraction joints; cover; curing; flexural strength; floors; footings; formwork (construction); foundation walls; foundations; hot weather construction; inspection; loads (forces); materials; mixing; mixture proportioning; placing; plain concrete; reinforced concrete; reinforcing steels; residential; serviceability; specifications; slab-on-ground; slabs; sulfates exposure; strength; structural analysis; structural concrete; structural design; walls; water; welded wire reinforcement.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

ACI 332-14 Residential Code Requirements for Structural Code & Commentary

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

ACI 332-20: Code Requirements for Residential Concrete and Commentary

This code covers the design and construction of cast-in-place concrete for one- and two-family dwellings and multiple single-family dwellings (townhouses), and their accessory structures. Among the subjects covered are the design and construction requirements for plain and reinforced concrete footings; foundation walls; slabs-on-ground; and requirements for concrete, reinforcement, forms, and other related materials. The quality and testing of materials discussed in this document are covered by reference to the appropriate ASTM standards.

This code is written to allow for reference by adoption in a general building code without changing its language. Background details or suggestions for carrying out the requirements or intent of the code are provided in the commentary. The commentary discusses some of the considerations of the committee in developing the code with emphasis given to the explanation of provisions that may be unfamiliar to code users or where significant departure exists from other concrete codes.

Keywords:

admixtures; aggregate; backfill; cement; compressive strength; cover; flexural strength; footings; formwork (construction); foundations; loads (forces); slabs; structural analysis; reinforcement.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.1

ir_71

junaid

nibbi

Veggeta

poolmand