Hello. Does anybody have this few papers:
Wissmann, JW., Hauck, C. – Efficient elastic-plastic finite element analysis with higher order stress-point algorithms. Computers and Structures 1983;17(1):89-95
Potts, DM., Gens, A. – A critical assessment of methods of correcting for drift from the yield surface in elasto-plastic finite element analysis. Int. J. Numer. Methods Eng. 1985;9:159-169
Luccioni LX., Pestana JM, Taylor RL. – Finite element implementation of non-linear elastoplastic constitutive law using local and global explicit algorithms with automatic error control. Int. J. Numer.Methods Eng. 2001;50:1191-1212
Best regards
freequo
Paper #3
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Another paper:
M.A. Crisfield, (1987)
"Plasticity computations using the Mohr—Coulomb yield criterion",
Engineering Computations, Vol. 4 Iss: 4, pp.300 - 308
Best regards
Still looking for papers mentioned in earlier post except that one from Luccioni.
But I have another few that I cannot download:
Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces
International Journal of Solids and Structures, Volume 13, Issue 11, 1977, Pages 1019-1035
Poul V. Lade
Single hardening constitutive model for frictional materials II. Yield critirion and plastic work contours
Computers and Geotechnics, Volume 6, Issue 1, 1988, Pages 13-29
P. V. Lade, M. K. Kim
Substepping schemes for the numerical integration of elastoplastic stress–strain relations
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
Volume 24, Issue 5, May 1987, Pages: 893–911,
S. W. Sloan
DOI: 10.1002/nme.1620240505
"Plasticity computations using the Mohr—Coulomb yield criterion",
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Single hardening constitutive model for frictional materials II. Yield critirion and plastic work contours
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Substepping schemes for the numerical integration of elastoplastic stress–strain relations
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Return Mapping Algorithms and Stress Predictors for Failure Analysis in Geomechanics
J. Engrg. Mech. 135, 276 (2009);
doi:10.1061/(ASCE)0733-9399(2009)135:4(276)
(9 pages)
Jinsong Huang1 and D. V. Griffiths2
Exact closed-form solution of the return mapping algorithm in plane stress elasto-viscoplasticity
J.C. Simo, S. Govindjee
Engineering Computations
ISSN: 0264-4401
DOI: 10.1108/eb023744
Return Mapping Algorithms and Stress Predictors for Failure Analysis in Geomechanics
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Exact closed-form solution of the return mapping algorithm in plane stress elasto-viscoplasticity
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Geradin, M., S. Idelsohn, and M. Hogge,
Computational Strategies for the Solution of Large Nonlinear Problems via Quasi-Newton Methods,
Computers and Structures, 13: 73-81
(1981).
Bathe, K.-J. and A. P. Cimento,
Some Practical Procedures for the Solution of Nonlinear Finite Element Equations,
Computer Methods in Applied Mechanics and Engineering, 22: 59-85
(1980).
Schreyer, H. L., R. L. Kulak and J. M. Kramer,
Accurate Numerical Solutions for Elastic-Plastic Models,
J. Pressure Vessel Tech., ASME, 101: 226-334
(1979).
Potts, D. M. and A. Gens,
A Critical Assessment of Methods of Correcting for Drift from the Yield Surface in Elasto-Plastic Finite Element Analysis,
International Journal for Numerical
and Analytical Methods in Geomechanics, 9: 149-159
(1985).
Simo, J. C. and Hughes, T. J. R.,
General Return Mapping Algorithms for Rate-Independent Plasticity,
Constitutive Laws for Engineering Materials: Theory and Applications, C. S.
Desai et al. eds., 221-231
(1987).
I've found these three:
Geradin, M., S. Idelsohn, and M. Hogge,
Computational Strategies for the Solution of Large Nonlinear Problems via Quasi-Newton Methods,
Computers and Structures, 13: 73-81
(1981).
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Bathe, K.-J. and A. P. Cimento,
Some Practical Procedures for the Solution of Nonlinear Finite Element Equations,
Computer Methods in Applied Mechanics and Engineering, 22: 59-85
(1980).
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Potts, D. M. and A. Gens,
A Critical Assessment of Methods of Correcting for Drift from the Yield Surface in Elasto-Plastic Finite Element Analysis,
International Journal for Numerical
and Analytical Methods in Geomechanics, 9: 149-159
(1985).
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Hello,
Unfortunately I'm not abroad any more so I cannot get some papers. Please help.
Accurate numerical solutions for drucker-prager elastic-plastic models
Benjamin Loret, Jean H. Prevost
Computer Methods in Applied Mechanics and Engineering
Volume 54, Issue 3, March 1986, Pages 259–277
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Computer Methods in Applied Mechanics and Engineering
Volume 33, Issues 1–3, September 1982, Pages 469–484
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************