Civil Engineering Association

Full Version: Guide to Retaining Wall Design
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Guide to Retaining Wall Design

Size: 5.04 MB | Format: PDF | pages: 155

[Image: 30446370894428038659.jpg]


[Image: info.png]

This Guide to Retaining Wall Design is the first Guide to be produced by the Geotechnical Control Office. It will be found useful to those engaged upon the design and construction of retaining walls and other earth retaining structures in Hong Kong and, to a lesser extent, elsewhere. This Guide should best be read in conjunction with the Geotechnical Manual for Slopes (Geotechnical Control Office, 1979), to which extensive reference is made. The Guide has been modelled largely on the Retaining Wall Design Notes published by the Ministry of Works and Development, New Zealand (1973), and the extensive use of that document is acknowledged. Many parts of that document, however, have been considerably revised and modified to make them more specifically applicable to Hong Kong conditions. In this regard, it should be noted that the emphasis in the Guide is on design methods which are appropriate to the residual soils prevalent in Hong Kong. Many staff members of the Geotechnical Control Office have contributed in some way to the preparation of this Guide, but the main contributions were made by Mr. J.C. Rutledge, Mr. J.C. Shelton, and Mr. G.E. Powell. Responsibility for the statements made in this document, however, lie with the Geotechnical Control Office.

[Image: Download.png]
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Direct link:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************
[Image: info.png]
Mirror links



[Image: Download.png]

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************



***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Guide to Retaining Wall Design 2ed

Size: 7.28 MB | Format: PDF | Quality: Scanner

[Image: 35842467474218791238.jpg]


[Image: info.png]

This Geoguide presents a recommended standard of good practice for the design of retaining walls in Hong Kong. The first edition of the Gwguide was published in July 1982 and preparation for a second edition begun in 1985 with a consultation exercise to obtain the views of practitioners on the first edition. Work on the revision began in 1987.

The Geoguide covers the types of retaining walls which are commonplace in Hong Kong, including conventional reinforced concrete walls, gravity walls such as crib walls, gabion walls and mass concrete walls, and cantilevered retaining walls. It does not aim to deal comprehensively with maritime structures nor structures used to support the sides of deep excavations, such as sheet pile walls.

[Image: download.png]
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************